Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

  1. Power the printer off completely.
  2. While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
  3. While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
  4. Allow the printer to warm up as normal.
22 juin 2023
  1. Click [start] on the Windows task bar, and then click [(All) Programs], [Canon], [MF Drivers], and [Uninstall Drivers]. The [MF Drivers Uninstaller] dialog box appears.
  2. Select the corresponding printer and click [Perform]. The confirmation message dialog box appears.
  3. Click [Yes]. …
  4. Click [Exit].
8 janv. 2019
  1. Power the printer off completely.
  2. While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
  3. While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
  4. Allow the printer to warm up as normal.
22 juin 2023
  1. Power the printer off completely.
  2. While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
  3. While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
  4. Allow the printer to warm up as normal.
22 juin 2023
  1. Click [start] on the Windows task bar, and then click [(All) Programs], [Canon], [MF Drivers], and [Uninstall Drivers]. The [MF Drivers Uninstaller] dialog box appears.
  2. Select the corresponding printer and click [Perform]. The confirmation message dialog box appears.
  3. Click [Yes]. …
  4. Click [Exit].
8 janv. 2019

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.

Read Full Q/A … :
Unknown Printer

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :
Unknown Printer

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

Read Full Q/A … :
Unknown Printer

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :
Unknown Printer

Canon PIXMA MP190 – paper pulls to one side and ja
ANSWER : My Canon MP470 pulled paper to one side. Thanks for the simple solution. It worked and made doing my taxes a little less of a pain.

Read Full Q/A … :
Unknown Printer

Canon pixma – ink absorber almost full
ANSWER : They are on the bottom of the printer. If you want to clean them, you can take them out and wash them in hot tap water. Wring them out like a sponge. You will need to reset the printer. http://jezpinions.blogspot.com/2012/03/canon-mg6150-ink-absorber-reset-error.html

Read Full Q/A … :
Unknown Printer

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :
Unknown Printer

Canon pixma MX700
ANSWER : I have the Canon MX700 printer. The black said ’empty’ but looked 1/2 full and we hadn’t printed in 2 months, so i figured it was dry. I soaked the sponge part of the black cartridge in hot water for 10 minutes and rinsed in hot. Dried with tissue paper and put it in. The printer gave the same message. I held the Stop/Reset button for about 3 seconds—that cleared the thing and it printed. The i printed some lines of various colors to keep things fluid. Voila` . Fini.

Read Full Q/A … :
Unknown Printer