Reset my Brother DCP 7020 Printer

[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting.

Use the Machine Reset function to reset the machine`s settings to the factory settings. The network settings and the security settings will not be reset by the Machine Reset function.

Press [Settings]>[All Settings]>[Initial Setup]>[Reset].

Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.

The printer drops the network connection, resets its network settings to their factory defaults, and prints a Printer Configuration label and a Network Configuration label.

To change your printer IP address, type its current IP address into the address bar of a web browser. Then go to the Settings or Network page and change your printer`s network to a static/manual IP address. Finally, type in the new IP address.

– If the `Out of Memory` message appears when you are scanning a subsequent page, do one of the following: Press the blue key labeled BLACK START or the green key labeled COLOR START on the Brother machine to send or copy the pages you have scanned so far. Press the STOP/EXIT key to cancel the job.