Lexmark MS 810N
I have replaced maintenance kit, but I can’t reset the counter. I have tried turning off, holding in select and back buttons and turning on. Didn’t work. I tried a few other combos, too. Any ideas? Thanks.
Experienced technical support provide their insights in answering this question :
Press “2” & “6” keys on the numpad during startup. Key kombinations have changed a few years ago.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The maintenance kit includes a fuser, MPF pick roller and separator pad, pick tires, separator roller assembly, and transfer roller. These parts may be individually ordered and replaced if necessary.
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters. Select the counter that you want to reset.
The roller maintenance kit contains 3 pick rollers, a transfer roller and 3 separation rollers. A message is displayed when kit installation is recommended.
A maintenance kit is a set of replacement parts for a printer. Each printer has a preset maintenance interval, which occurs after a certain amount of pages are printed. The maintenance interval lets the user know that it`s time to install the maintenance kit so that the parts within the printer do not get overused.
The biggest difference lies in the name, as they tend to include all of the same parts. A maintenance kit should include a new fuser assembly, and a fuser kit should include all the necessary maintenance parts.
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters. Select Fuser Reset or ITM Reset.
Product Description
The ADF maintenance kit contains an ADF media pick roller, ADF separation roller, ADF feed belt and a torque limiting clutch.
If the display panel on your HP LaserJet reads “Perform Printer Maintenance”, “Perform User Maintenance”, “Maintenance Kit Low”, “Maintenance Kit Very Low”, or anything along those lines it means your printer needs a preventative maintenance kit, which includes a fuser and various rollers.
Place the smart chip against the pins on the reset device. A red light will flash to show you that the chip is engaged. When the light turns green, usually six or seven seconds later, the cartridge chip is reset and ready to use.
After replacing all the items in the maintenance kit, reset the maintenance counter: 1 Press and hold the Select and Return buttons while you turn the printer on. 2 Release the buttons when Performing Self Test appears on the display.
The maintenance box stores ink that gets flushed from the system during print head cleaning. When an ink cartridge is expended or the maintenance box is at the end of its service life, you need to replace it.
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters. Select Fuser Reset or ITM Reset.
A maintenance kit is a set of replacement parts for a printer. Each printer has a preset maintenance interval, which occurs after a certain amount of pages are printed. The maintenance interval lets the user know that it`s time to install the maintenance kit so that the parts within the printer do not get overused.
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters. Select Fuser Reset or ITM Reset.
If the display panel on your HP LaserJet reads “Perform Printer Maintenance”, “Perform User Maintenance”, “Maintenance Kit Low”, “Maintenance Kit Very Low”, or anything along those lines it means your printer needs a preventative maintenance kit, which includes a fuser and various rollers.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Reset maintenance kit
ANSWER : Press “2” & “6” keys on the numpad during startup. Key kombinations have changed a few years ago.
Read Full Q/A … :
Lexmark MS 810N
oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?
Read Full Q/A … :
Lexmark MS 810N
Reset HP Color Laserjet 4700 transfer kit
ANSWER : How about the situation when resistor does not reset the transfer belt count and even new transfer belt out of the box is not doing it. Do you have any idea how to solve this problem? I did reset transfer belts and fusing units on several HL 4700 printers with no problem but also I came across few which were not possible to reset even with oryginal parts.
Read Full Q/A … :
Lexmark MS 810N
ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.
Read Full Q/A … :
Lexmark MS 810N
M806 replace maintenance kit
ANSWER : Have you tried to see if there’s a reset maintenance kit from the menus ?
Read Full Q/A … :
Lexmark MS 810N
reset maintenance tank
ANSWER : Ruthijean…Performing a reset is only part of the solution. The waste ink pads which line the bottom of the case should be cleaned or replaced. To reset the maintenance counter do the following:
Read Full Q/A … :
Lexmark MS 810N
Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.
Read Full Q/A … :
Lexmark MS 810N
HP C6180 Hard Reset procedure
ANSWER : How do I hold down the # and the 6 at the same time? The “#” requires holding the shift key and the “6” doesn’t. Maybe you all have a different type of keyboard. My printer is HP 1220C.
Read Full Q/A … :
Lexmark MS 810N