Epson LQ 300

Experienced technical support provide their insights in answering this question :
down load ssc Epson reset

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Turn on the printer by pressing the LF/FF and Pause 03 buttons. To confirm, print the test sheet as shown below 01 Turn on the printer while holding down the Tear Off (Font) button. 02 The printer switches to Default Setting mode and prints language selection instructions.
If you are having trouble getting your cartridge to read properly or are having connectivity issues with your printer, sometimes a hard reset will resolve the problem. Power down the printer and then unplug the power cord from the printer and the wall. Wait for a minute, then plug the printer back in.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
While troubleshooting your Epson printer, you may need to completely reset the device. A factory reset will return your printer to its out of the box settings.
How To Reset Epson Ink Cartridge Chip Without Resetter. Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
If you`ve tried all possible solutions and you still can`t print to your printer, reset the printing system. This process deletes all printers from your list of printers, deletes information about all completed print jobs, and deletes all printer presets.
Just like computers, printers have volatile memory (RAM) that is removed when you turn the printer off. Volatile memory requires power to store the information. Deleting volatile memory is easy: Simply shut down or unplug your printer for a minute or so.
Usually, it should not take more than a few minutes to restore the printer to its factory settings. However, I recommend you to perform the following steps to isolate the issue and arrive at a fix: Disconnect the power cable from the printer while the printer is still ON.
If you set a Epson Web Control password and forgot the user ID or password, try entering the following: User ID: EPSONWEB. Default password: admin.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
Most ink cartridges only require a single press of the button to reset it, but if it doesn`t reset, try holding the reset button for a few seconds.
A reset button disconnects the chip from printer temporarily. It makes the printer thinks you removed and reinserted the cartridge.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Select Start , then select Settings > Devices > Printers & scanners . Under Printers & scanners, find the printer, select it, and then select Remove device. After removing your printer, add it back by selecting Add a printer or scanner.
Resetting your computer will wipe all personal files and documents from the PC`s hard drive, so you should back up your files first. You can use the built-in Windows backup utility or a third-party backup software like EaseUS Todo Backup.
Resetting to Factory Settings

During the factory resetting process, your PC`s hard drive is completely erased and you lose any business, financial and personal files that may be present on the computer. Once the resetting process starts, you cannot interrupt it.

For healthier print heads and more efficient ink consumption, however, it`s better to leave your printer on. Constantly switching your printer off and on will decrease your printer`s lifespan, so try to keep the off/on to a minimum.
Turn the printer off then back on. If the issue persists, turn the printer off, unplug the power cord and then wait at least three minutes before plugging the power cord back in and turning the printer back on.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Turn off the printer. Wait at least 5 seconds, then turn it back on. If the error message still appears, write down the error number listed in the LCD panel (Cffff/Eggg), turn off the product, unplug the power cord, then contact a qualified service representative.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson R200 Won't Print with New Cartidges
ANSWER : I have the Epson R200 printer. I have all new cartridges. Thought there was a paper jam but that was not the case. I cannot get it to print or show ink levels

Read Full Q/A … :

Epson LQ 300

Reset an Epson R200?
ANSWER : down load ssc Epson reset

Read Full Q/A … :

Epson LQ 300

Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.

Read Full Q/A … :

Epson LQ 300

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson LQ 300

How to reset an Epson 4800?
ANSWER : How are you Sir ? I have this printer but I’m facing a technical problem can you help me out.

Read Full Q/A … :

Epson LQ 300

Epson Artisan 700 Ink Reset — Any Other Way
ANSWER : I really need the utility but How do I send you a message? I dont see your address

Read Full Q/A … :

Epson LQ 300

oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ┬┐isn’t it?

Read Full Q/A … :

Epson LQ 300

? How to reset Epson Stylus Office BX320FW
ANSWER : Nice Tool, my print is not in list but i have use unsupportet Printer, und wirte the reset. And now my Printer working fine!! Big THX

Read Full Q/A … :

Epson LQ 300