Canon Pixma IP6000D

Experienced technical support provide their insights in answering this question :
ditto, ditto & ditto

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

In order to maintain the best printing, the ink used when Cleaning is absorbed into the ink absorber inside the printer. The ink absorber requires the replacement when it is full. However, it cannot be replaced by yourself.
The error “Ink Absorber Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.
Ink absorber absorbs the ink used when Cleaning is executed. In order to maintain the best printing, the ink used when Cleaning is absorbed into the ink absorber inside the printer. The ink absorber requires the replacement when it is full. However, it cannot be replaced by yourself.
Soaking in warm Water can also help

Fill a bowl with approx. 60 degrees Celsius warm water. Place the cartridge, which is sealed in the bag, into the warm water. After about five minutes, the bag with the cartridge should be removed from the water.

The bottom part of the printer Canon Pixma is fully covered with sponges and forms the so-called waste ink tank. Each time you clean the printheads on your inkjet printer, ink is sucked out of the printer`s print nozzles and out of the cartridges, and into the sponges on the bottom of the printer via one or more hoses.
The purpose of the waste ink absorber is to safely collect any waste ink expelled during cleaning of the print head and borderless printing on photo printers. Over time this waste ink absorber can become full and will need to be replaced.
When these pads are saturated, the printer will notify you with an error message such as “Ink Absorber Full.” Some models display a series of flashing lights that you must consult the user manual to decipher. When the ink absorber pads are full, you can easily remove and clean them on most Canon printers.
Yes, you do. CompAndSave`s cheap ink for Canon printer is the answer. Remanufactured or compatible ink cartridges for Canon printer produce the same quality prints, but you`ll get them at a much lower cost.
How long does Canon ink last? Canon ink can last for up to two years in its sealed packaging. Even after two years, you may still get some more life out of the cartridge, so it may be worth trying after the fact.
Conclusion. If you want to re-use your waste ink, think about ways to use it for things like tie-dyeing, caligraphy or any manner of other craft activities (be aware that the inks are unlikely to be suitable for use by children!) but don`t use it in your printer.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
If you`re experiencing poor print quality (banded / streaked prints, incorrect colors, blank pages, etc.) and standard print headcleanings and deep cleanings don`t resolve the problem, an ink flush may improve the print quality.
You have the option of disposing of your existing cartridge and replacing it with a new one, but the far most cost-effective option is to empty this waste toner cartridge yourself. Below, we`re going to step you through how you can save on your printing expenses by handling this process yourself.
Insert the Waste Ink Drain Tube coupler into the Waste Ink Drain, on the back of the printer. It will click and lock into position. Loosen the Black Plastic Cap on the top of the Waste Ink Tank. The waste ink will flow out of the Waste Ink Drain Tube.
Deep Cleaning consumes a larger amount of ink than Cleaning. Cleaning the print head frequently will rapidly deplete your printer`s ink supply. Consequently, perform cleaning only when necessary.
PIXMA: Consumer-level printers for personal and home use, also includes photo printers. PIXMA G-Series: Refillable ink tank (MegaTank) printers. PIXMA PRO: Professional inkjet printers. SELPHY/IVY: Compact photo printers. MAXIFY: High-yield inkjet printers for small offices.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings. In the Reset settings menu, select the desired area you want to set back to the factory defaults.
Introduction. While troubleshooting your Canon printer, you may need to completely reset the device. A factory reset will return your printer to its out of the box settings. This guide will help you factory reset your printer.
Once you`ve removed the old waste ink pad, clean the area around the pad with a damp cloth or paper towel. Then, install the new waste ink pad and reassemble the printer. After replacing the waste ink pad, you`ll need to reset the waste ink counter to clear the “waste ink pad full” error message.
Apply rubbing alcohol, hair spray, or hand sanitizer to dilute the stain, making it easier to remove during the wash. These solvents help tackle most types of ink stains but remember to test the stained garment for colorfastness first as they can also attack fabric dyes and cause further damage.
Isopropyl alcohol is a solvent that can dissolve organic compounds such as those found in ink. As a result, it is effective at removing ink stains from plastic surfaces.
Why Are Ink Cartridges So Expensive? Here`s a quick and simple answer: Ink cartridges are expensive so companies can make a profit. Most printers are sold at a loss. A manufacturer makes money NOT by selling consumers an inkjet or laser printer, but by selling the supplies needed to print.
Be Wary of Printer and Cartridge Price

Cheap printers generally use expensive cartridges. They end up costing more to maintain in the long term.

Shelf life of printer ink in most cases is approximately two years. After that time there may be problems with the cartridge. The sponge designed to deliver ink to the printheads can dry out.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

replacing waste ink absorber on Canon Pixma ip6000
ANSWER : ditto, ditto & ditto

Read Full Q/A … :

Canon Pixma IP6000D

Canon pixma – ink absorber almost full
ANSWER : They are on the bottom of the printer. If you want to clean them, you can take them out and wash them in hot tap water. Wring them out like a sponge. You will need to reset the printer. http://jezpinions.blogspot.com/2012/03/canon-mg6150-ink-absorber-reset-error.html

Read Full Q/A … :

Canon Pixma IP6000D

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :

Canon Pixma IP6000D

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

Read Full Q/A … :

Canon Pixma IP6000D

Canon iP1700 ink absorber reset and remove/clean
ANSWER : The 6 step directions about tank full error worked perfectly for me to correct the problem

Read Full Q/A … :

Canon Pixma IP6000D

How to reset ink cartridge Canon Pixma MG6320
ANSWER : Your post is a bit confusing. You don’t reset the chip, you pull off the old one and replace it with the one they gave you.

Read Full Q/A … :

Canon Pixma IP6000D

waste ink tank
ANSWER : There is no waste ink “tank”. There are some sponges and they usually are about 1/4 saturated when you get the message. If you want to go through the trouble to remove them, you can just wash them in hot water and dry them out as the ink is water soluble. Or, you can search the web for a waste tank reset procedure and not worry about it.

Read Full Q/A … :

Canon Pixma IP6000D

Reset ink absorber full
ANSWER : Free download of resetter here http://www.k58n.com/3ammresetter/canonresetter/410.html

Read Full Q/A … :

Canon Pixma IP6000D