Brother MFC 3220C

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Damage or corruption of the printer drivers installed on the system can also cause “Printer not activated, error code 41. Users experiencing this issue need to completely remove the printer drivers installed on the system using the device manager and then reinstall the printer drivers.
Machine Error 41 indicates a mechanical malfunction with Brother machine. It is an indication that there is a problem with the printhead on your machine and the machine requires repair. Often, unplugging the unit from the power source and then plugging it back in again can clear this error message.
Error code 41 usually occurs whenever users attempt to print a document or picture and usually occurs when certain changes are made to Windows. For example, users might have installed the wrong drivers, or the responsible service is not running.
The Kernel Power Error 41 may occur due to an underpowered or faulty power supply problem. You need to make sure that your system has sufficient wattage to handle the installed devices appropriately. Additionally, consider acquiring a UPS (Uninterruptible Power Supply) such as a battery backup power supply.
Error code 41 is one of several Device Manager error codes. It`s caused either by a hardware device that`s been removed after the driver was loaded or by an issue with the device driver itself.
(Code 41)” This problem occurs if you install a driver for a non-Plug and Play device, but Windows cannot find the device. From Start, search for device manager and select Device Manager from the results. Right-click the device in the list.
This error has nothing to do with the laser/scanner—it means “unexpected paper size.” The printer measures paper size two ways: The paper cassette has a set of ridges and/or levers usually found on the right side.
Print error code: 41

This is a safety measure which prevents damage to the printer if the galvanometers behave unexpectedly. This behavior may be caused by a loose connection with the galvanometer cables. If you encounter this error, contact Formlabs Support or your authorized reseller.

[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].
This error has nothing to do with the laser/scanner—it means “unexpected paper size.” The printer measures paper size two ways: The paper cassette has a set of ridges and/or levers usually found on the right side.
(Code 41)” This problem occurs if you install a driver for a non-Plug and Play device, but Windows cannot find the device. From Start, search for device manager and select Device Manager from the results. Right-click the device in the list.
(Code 41)” This problem occurs if you install a driver for a non-Plug and Play device, but Windows cannot find the device. From Start, search for device manager and select Device Manager from the results. Right-click the device in the list.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Re: Error Code B200
ANSWER : comment posted below worked perfectly on my first try. Thank you soooo much! Also about the generic ink, I’ve had this printer for about 7 years and it was the first time I put generic ink in it and the first time I got the B200 error.

Read Full Q/A … :

Brother MFC 3220C

printer error fix
ANSWER : Epson 2540

Read Full Q/A … :

Brother MFC 3220C

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

Brother MFC 3220C

How to fix error code B200
ANSWER : There’s lots of forum posts dealing with the B200 error. http://www.fixyourownprinter.com/posts?utf8=%E2%9C%93&q=b200

Read Full Q/A … :

Brother MFC 3220C

Re: Error 5100
ANSWER : To try and resolve the issue, please follow these steps:

Read Full Q/A … :

Brother MFC 3220C

Re: Canon error codes
ANSWER : i have canon mf4450 printer given page error while quantity page printing

Read Full Q/A … :

Brother MFC 3220C

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :

Brother MFC 3220C

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :

Brother MFC 3220C