Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.
A printer driver is a piece of software that translates your computer data into a format your printer can understand. Each printer is built with different hardware and software, so your computer needs to learn how to give instructions to each particular machine. That`s what a printer driver is used for.
Right-click Start , then select Settings > Bluetooth & devices > Printers & scanners. Find the printer, select it, then select Remove. After removing your printer, add it back by selecting Add device. Wait for your device to find nearby printers, choose the one you want, then select Add device.
Restart the printer and try again. Unplug the printer from an outlet. You can plug it back in again to see if it works this time. Check if the printer is properly set up or connected to your computer`s system.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
The most common reason is an unreliable connection between the printer and the computer. You might also have a paper jam, out-of-date drivers or a print spooler service with bad data.
The software is downloaded from the manufacturer and installed on either a single computer or onto a server where multiple computers will access it. You`ll need a printer driver for each type of printer you have in your office because each type of printer communicates differently with the computer.
Printers show up under “unspecified” when Windows cannot associate an appropriate driver. Reference this article to find drivers for your Brady printer: How to Find Windows Printer Drivers for Your Brady Printer. If you have recently installed the driver, simply rebooting your PC can resolve the unspecified status.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Press Win + X to open the WinX menu. Click on Device Manager from the context menu. In Device Manager, click on View and select Show hidden devices. Next, expand the Printers section to view your printer.
Choose “Printers & scanners“. Select “Add a printer or scanner“. Wait for the “The printer that I want isn`t listed” option to appear, then select it. Select “Add a printer using a TCP/IP address or hostname” , then select “Next“.
Simply press the Windows key + R shortcut to bring up the Run dialog, or open the Command Prompt. Type control printers and press Enter. The Devices and Printers window will open immediately.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
There are two main types of printer drivers: Printer Command Language (PCL), and PostScript (PS).
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Make sure your Wi-Fi network and printer setup meet connection requirements. Restart the printer and the computer or mobile device to clear possible error conditions. Make sure the printer is not connected to a computer with a USB cable.
HP Smart app (Android, iOS): Open the app, tap your printer, and then tap Printer Information or Network Information to find the IP address. Most printers with a touchscreen display or menu: Open the Wireless Summary or Network Settings menu to find the IP address.
Make sure your Wi-Fi network and printer setup meet connection requirements. Restart the printer and the computer or mobile device to clear possible error conditions. Make sure the printer is not connected to a computer with a USB cable.
Make sure your Wi-Fi network and printer setup meet connection requirements. Restart the printer and the computer or mobile device to clear possible error conditions. Make sure the printer is not connected to a computer with a USB cable.
If you connect the printer to your computer via a USB cable, check whether the cable is properly connected. If it isn`t, re-plug it and make sure they are properly seated into the ports on both your printer and your computer. Try another USB port on your computer in case the one you previously used is broken.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

Read Full Q/A … :
Unknown Printer

epson printer problems
ANSWER : My Printer Has A Internal Erro

Read Full Q/A … :
Unknown Printer

Oki C5300 problem : network menu disappeared.
ANSWER : You need MuWin and your NIC firmware to upload to the host, but both things are keep under cover by OKI… Find attached old (and probably useless for you) files; check and say.. (https://mega.nz/#F!oEkA3JKZ)By the way, you should specify what firmware do you need ¿isn’t it? I don’t know yet what firmware uses my c511dn nor what NIC host it mounts… :~(

Read Full Q/A … :
Unknown Printer

HP PSC 2410 clicking noise problem
ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!

Read Full Q/A … :
Unknown Printer

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :
Unknown Printer

problem in driver
ANSWER : we offer Assignment Help Australia for you do not waste more time to searching others just click us.

Read Full Q/A … :
Unknown Printer

Printing problem
ANSWER : Either the cartridge carousel jumped out of alignment or the carousel brake solenoid is sticking. Both issues have been covered on the forum before. Do a search.

Read Full Q/A … :
Unknown Printer

Ink Problem
ANSWER : Remove the color cartridge and do a “blot” test by pushing the heads on the bottom onto a paper towel. You should see all the colors. If not, then run hot tap water on the heads. Could be a bad ink cartridge if it still doesn’t work.

Read Full Q/A … :
Unknown Printer