Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.
Open HP Smart app, click your printer, click Printers in the top menu bar, and then click Diagnose & Fix. Follow the instructions if any issues are found. If you still can`t print, remove and re-add the printer.
Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in.
Step one: Reset the product

Unplug the power cord from the wall outlet. Wait 30 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the rear of the product.

1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”
Press and hold button for 15 seconds

Reset the HP 1200w Accessory to its factory default settings.

Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.
Restart the printer and try again. Unplug the printer from an outlet. You can plug it back in again to see if it works this time. Check if the printer is properly set up or connected to your computer`s system.
If you are using Windows 10, Windows 8.1, or Windows 8, select Control Panel -> Hardware and Sound -> Devices and Printers. If you are using Windows 7, from the Start menu, select Devices and Printers. If you are using Windows Vista, select the Control Panel -> Hardware and Sound -> Printers.
On the control panel, open the Setup, Service, or Settings menu. Select Preferences, Printer Maintenance, or Tools. Select Web Services, Printer Update, or LaserJet Update. If prompted, follow the instructions to turn on Web Services.
Step one: Reset the product

Unplug the power cord from the wall outlet. Wait 30 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the rear of the product.

Press the Windows key + R to open the Run command box, type printmanagement. msc and hit Enter. This will launch the Print Management console immediately. Expand the Print Servers node on the left, you can add / delete the printers and drivers, view printer queue, configure the printer port, print test page, etc.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
Depending on your hardware, you may use the Windows Logo Key + PrtScn button as a shortcut for print screen. If your device does not have the PrtScn button, you may use Fn + Windows logo key + Space Bar to take a screenshot, which can then be printed.
The 24 character error code is a failure of the short Disk Self Test ( DST ) and would indicate that the Hard Drive is failing and needs to be replaced. Hi, It means the hard drive has failed the quick test and needs to be replaced.
There is a communication failure with the imaging drum. Turn the printer off and then on. If the error persists, replace the imaging drum. If the error still persists, contact HP. 10.000X Supply memory error or 10.100X Supply memory error.
Retrieve the recovery key from your Microsoft account

Sign into your Microsoft account and retrieve your recovery key. Sign in from the Microsoft recovery key page. Using another computer or mobile device, go to https://windows.microsoft.com/recoverykey (in English).

A default printer is a printer all print jobs are sent to unless otherwise specified. Having a default printer prevents a program from asking the user what printer they want to use each time they print. The picture is an example of setting a printer as the default printer in Windows.
Set default printer through Command Prompt. This option works best if you like to have precise control over your hardware settings. Open the Command Prompt, and then type in “wmic printer get name,default” (without the quotes) and press Enter. Here is a list of all the printers that can be used with your PC.
🖥 How to Factory Reset a PC

Navigate to Settings > Update & Security > Recovery. You should see a title that says “Reset this PC.” Click Get Started. You can either select Keep My Files or Remove Everything.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP psc 2110 all-in-one won't turn on after power o
ANSWER : left the printer on now i cant get the printer to go on

Read Full Q/A … :
Unknown Printer

HP PSC 1510 copying problems
ANSWER : my hp photocopy is not working

Read Full Q/A … :
Unknown Printer

HP psc 1210 Wont Feed Paper
ANSWER : This printer seems to have special problems with paper feed asy. When functioning works

Read Full Q/A … :
Unknown Printer

HP PSC 1610 – problem installing hardware
ANSWER : If you want to get proper detailed information about hp printer then you should call on 1-888-924-2961 toll free number. They provide you step by step methods of installation process and driver support services.

Read Full Q/A … :
Unknown Printer

HP PSC 2410 clicking noise problem
ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!

Read Full Q/A … :
Unknown Printer

HP PSC 1210 Service Manual?
ANSWER : Hi Abe,

Read Full Q/A … :
Unknown Printer

HP PSC 2510 all-in-one network setup problems
ANSWER : Assemble the accompanying things:

Read Full Q/A … :
Unknown Printer

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :
Unknown Printer