Canon Pixma MP130
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Paper is jammed in paper output slot or in rear tray.
Paper Is Jammed inside Printer
If you cannot pull the paper out from the paper output slot or from inside the printer, try to pull the paper out from the rear side of the printer.
Make sure that the paper size loaded in the printer and the paper size settings for printing are appropriate. Press the printer`s OK button to eject the paper and restart printing from the front of the next piece of paper. The reverse side of the ejected sheet is not printed.
Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier. Hold the paper with both hands, and pull it out slowly so as not to tear it. If you cannot pull out the paper, turn the printer back on without pulling forcibly. The paper may be ejected automatically.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
If paper jams, remove it following the appropriate procedure as shown below. If you can see the jammed paper at the paper output slot or the rear tray: 1300.
Support Code 1300 Appears (Paper is Jammed When Feeding Paper From the Rear Tray) – G7020.
Canon Knowledge Base – Support Code 1300 Appears (Paper is Jammed in the Paper Output Slot / Top Feed / Manual Feed Tray) – PRO-300.
If paper jams, remove it following the appropriate procedure as shown below. If you can see the jammed paper at the paper output slot or the rear tray: 1300.
Canon Knowledge Base – Support Code 1300 Appears (Paper is Jammed in the Paper Output Slot / Top Feed / Manual Feed Tray) – PRO-300.
Once the printer believes the cartridge has run out of ink you will be presented with either the E13 message or the E16 message that indicates that you need to change the ink cartridge. If this message is being displayed on your printers screen then your printer will stop printing and scanning.
If paper jams, remove it following the appropriate procedure as shown below. If you can see the jammed paper at the paper output slot or the rear tray: 1300.
If paper jams, remove it following the appropriate procedure as shown below. If you can see the jammed paper at the paper output slot or the rear tray: 1300.
Paper is jammed when feeding paper from rear tray.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Print problem with Canon MP620
ANSWER : Open the front of the printer.
Read Full Q/A … :
Canon Pixma MP130
Canon MP610 printhead or purge unit problem ?
ANSWER : Hello, can somebody help me here?
Read Full Q/A … :
Canon Pixma MP130
Canon S600 Printer Problem
ANSWER : if you have been utilizing the same cartridge for more than a couple of months, you might need to check the ink or toner levels. On most present day printers, you can check these levels utilizing programming or by a light pointer on the front of the machine (counsel the proprietor’s manual for subtle elements on marker lights).
Read Full Q/A … :
Canon Pixma MP130
Canon MP530 – 6A00 Purge Unit?
ANSWER : I just took apart my MP530 which produces the 6A00 error, and cleand the wiping pads, rubber blades and everything I could reach from the purge unit. I also cleaned the print head. The waste ink level in the EEPROM is 66%.
Read Full Q/A … :
Canon Pixma MP130
Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.
Read Full Q/A … :
Canon Pixma MP130
Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.
Read Full Q/A … :
Canon Pixma MP130
Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.
Read Full Q/A … :
Canon Pixma MP130
Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.
Read Full Q/A … :
Canon Pixma MP130