Brother Intellifax 1270

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you can`t receive faxes after you change your Receive Mode and Ring Delay settings, then a person or device at your location is answering the line before your machine can answer it. – If you don`t receive the fax, your machine will require service. Your machine has a one-year limited exchange warranty.
Wipe dirt off the machine using a slightly damp clean cloth. Clean the white bar and the glass cover. Moisten a small piece of clean soft, lint-free cloth with isopropyl alcohol and carefully remove dirt from the glass cover and the white bar of the scanner.
Check the fax connection

Check for phone line connection issues that might cause fax receiving to fail. Confirm the fax cords are in the correct ports: The phone line should be connected to the 1-LINE port and the answering machine, if used, should be connected to the 2-EXT port on the back of the printer.

The fax number may be incorrect. You should double-check it`s correct. The receiving machine could be broken or run out of ink, paper. The fax could have been picked by the wrong person.
Here are some troubleshooting tips for the most common fax problems: image quality, paper jams and connectivity issues. The most common image quality problems with faxes are pages that come out too dark, too light or are unreadable due to streaks, splotches and spots.
Common problems for fax machines include image quality, paper jams, connectivity issues, or sending and receiving errors.
You can use the Transmission Verification Report as proof that you sent a fax. This report lists the receiving party`s name or fax number, the time and date of transmission, duration of transmission, number of pages sent, and whether or not the transmission was successful. Prints a report after every fax you send.
The Failed (Communication error) could occur for different reasons: The call was disconnected before the fax could be sent. Normally, this error occurs when the far side hangs up. The fax service attempted to send the same message multiple times unsuccessfully.
It has been a longstanding business practice to purchase printers and use them until they die, which can be 10 years or more. But at the same time, copiers and fax machines are being leased and replaced every three years.
If you have registered your Brother machine`s warranty, fax a piece of paper with the word TEST printed on it to 1-877-268-9575. Brother`s automated Fax Test Sheet and Product Registration system will automatically fax you a confirmation sheet upon receiving your test fax.
If the memory is full, try sending a monochrome fax using the Direct Send feature or sending your faxes in smaller batches. If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax.
If you have registered your Brother machine`s warranty, fax a piece of paper with the word TEST printed on it to 1-877-268-9575. Brother`s automated Fax Test Sheet and Product Registration system will automatically fax you a confirmation sheet upon receiving your test fax.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

my fax-2840, give me a error that says print unable EC.
ANSWER : Exhaust fan error. If you put your hand over it and don’t feel air coming out, it’s usually dirt or something keeping it from spinning. It almost never goes bad needing replacement. Try blowing it out first. Read this post

Read Full Q/A … :

Brother Intellifax 1270

Changing Language of Printer Brother MFC-J5910DW
ANSWER : I have a 2720DW from the netherlands it is a french model an it has the code 0009

Read Full Q/A … :

Brother Intellifax 1270

Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.

Read Full Q/A … :

Brother Intellifax 1270

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :

Brother Intellifax 1270

4F displayed on Brother 990CW printer?
ANSWER : That’s a printhead error.

Read Full Q/A … :

Brother Intellifax 1270

Brother MFC-L2740DW maintenance mode
ANSWER : Hi,

Read Full Q/A … :

Brother Intellifax 1270

Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W

Read Full Q/A … :

Brother Intellifax 1270

Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!

Read Full Q/A … :

Brother Intellifax 1270