HP LaserJet M5035
I have HP lj m5035 MFP,My problem is when I copy using in ADF and after that If I want to copy also using flatbet,The Copier it takes from the ADF that is should be taking in Flatbet.Please help me to fix this one.

Experienced technical support provide their insights in answering this question :
Nice day. (QUALITY IS OUR CULTURE)

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

HP has determined that 99% of all lines and streaks on copies made by feeding the original documents through the ADF are caused by debris on the ADF glass. Debris can include dust, paper or toner dust, residue from sticky note adhesive, correction fluid or tape, ink, fingerprints, and more.
Check for a Firewall setting on your computer. If a Firewall on your computer is active, it may be rejecting the necessary network connection needed for the network scanning software to operate properly. Disable the Firewall on your computer and try the network scanning again.
Click the Scan tile on the HP Smart app home screen. Select an option from the top menu bar. Scanner: Place the original on the printer scanner glass or into the automatic document feeder (ADF). Select scan job type, size, color, and resolution settings, and then click Scan in the lower right corner.
This happens when the rollers or the transfer belt inside the printer get dirty or covered in excess dirt, ink or toner powder, and as the paper is moved through the printer the `tracks` are being left on the page. This is normally the case when the tracks on the page are located at either end.
Black copies or images scanned into the computer are typically caused by dirt or white out on the scanner unit. The scanner unit is the mechanism that reads in the documents that are being copied or transmitted.
First check your connection to the scanner and computer: Make sure your scanner`s AC adapter is securely connected to the scanner and a working electrical outlet. Make sure the interface cable is securely connected to the scanner and your computer, and that the cable is not damaged or crimped.
File Size Is Too Large

The most common reason scan to email can fail is because the size of the file you are creating is too large for the file size limit assigned to your email account. Almost every email account has a maximum file size to successfully send an email.

Remove any toner or other debris from the drum by spraying it with compressed air. Place the drum back in the copier carefully, and replace the toner cartridge. With the glass cleaned, loose toner removed and the drum cleaned, the streaks should be gone.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

These types of lines are typically caused by dirt or white out (correction fluid) on the scanner unit, or one of the corona wires for printing is dirty. This problem is usually resolved by cleaning the scanner glass, scanner glass strip and white plastic bar with a soft lint-free cloth, or cleaning the corona wires.
nounPrinting. a document, drawing, or the like, consisting of two tones, as black and white, without intermediate gradations.: Compare halftone (def.
There are three steps that make up the basic scanning workflow: scan, register, and detail.
Step 1: Unplug the power cord from the scanner. Step 2: Using a soft, lint-free cloth, like a microfiber cloth, wipe off the dust from the scanner glass. Step 3: If the glass has smudges or other contaminants, use a little bit of glass cleaner on a microfiber cloth and wipe the glass.
On resetting a scanner, it discards all of its explicit state information which may have been changed by invocations of useDelimiter(java.
Cleaning your scanner

Unplug the scanner. Spray a specialist glass cleaner onto a soft, lint-free cloth or open a pre-moistened wipe. Raise or remove the lid of the scanner. Wipe the upper and lower glass plates until visible dust specks and grease have been removed.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
When it isn`t working properly, the quality of your prints can suffer. Signs of a bad transfer roller include streaking, squealing, jamming and odors emanating from the printer. Troubleshoot your transfer rollers to restore your prints to their normal high quality.
Printers are configured in the Printers section of the Windows Control Panel. Printer Settings: Displays the printer settings window associated with the selected printer. The desired paper size, among other settings, can be selected in the printer settings window.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
Every 3D scanner including “laser”, “white light”, “structured light”, “probe”, “arm” or “terrestrial”, needs calibration. This is a process by which a scanner`s software is adjusted to its hardware using a standard scale.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
The error displays for scanner hardware or power issues, such as a scanner bar jam or calibration issue, low scanner bulb temperature, or an internal or external electrical problem.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

problem in copying or scanning
ANSWER : Nice day. (QUALITY IS OUR CULTURE)

Read Full Q/A … :

HP LaserJet M5035

canon mx320 copies have blk line down the right side of copies
ANSWER : If you are using the ADF feeder to make copies, then check the small glass on the left side. If there is any dirt or whiteout on the glass, it will result in a line down that spot. You can confirm it by looking at the copy that has the line. If it is dirt on the glass, the line won’t go all the way from top to bottom. There will be a margin on each end.

Read Full Q/A … :

HP LaserJet M5035

HP PSC 1510 copying problems
ANSWER : my hp photocopy is not working

Read Full Q/A … :

HP LaserJet M5035

Horrible lines in copying or scanning
ANSWER : If you are using the ADF, all pages are scanned with the scanner stationary on the left side. There is a small glass above the scanner and if there is anything on it, dust, whiteout, ink etc. it will interpret it as a line. First solution would be to clean the glass with window cleaner and a paper towel. If that doesn’t solve it, then scan the page on the flat glass and see if the problem continues.

Read Full Q/A … :

HP LaserJet M5035

Scanning and copying faint image
ANSWER : The scanning is done by light bouncing off of some mirrors. Could be dust on one of the mirrors. Try shining a light down into the scanner unit and look at the mirror that is visible and see if it has dust coating on the side that is light.

Read Full Q/A … :

HP LaserJet M5035

scans and prints slanted copies
ANSWER : If you are copying from the adf, the scanner would be stationary on the left side. Copying from the glass the scanner moves across. I can’t agree with the Canon “tech” as paper being stuck in the ADF causing both issues. It would have been my guess if it was just the ADF. I can’t agree with it being a scanner problem unless, the scanner itself was slightly skewed. That would be visible if you lifted the top and looked down on it. The only other solution would be that somehow the paper it is printed on is feeding slightly askew. That could be caused by a piece of paper in the paper path.

Read Full Q/A … :

HP LaserJet M5035

problem in driver
ANSWER : we offer Assignment Help Australia for you do not waste more time to searching others just click us.

Read Full Q/A … :

HP LaserJet M5035

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP LaserJet M5035