Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Open the start menu and select Control Panel > Administrative Tools > and choose the Services icon. Locate the Print Spooler service and right-click. Then select the option to “Stop” the service.
Check Cables and Printer USB Ports

Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.

They do this using a driver or specialized software that has been designed to convert the file into a language that the printer can understand. The image or text is then recreated on the page using a series of minuscule dots.
Click on Device Manager from the context menu. In Device Manager, click on View and select Show hidden devices. Next, expand the Printers section to view your printer.
Ghost prints happen when the drum or fuser unit within your printer become faulty. Because a fault with this element won`t heat the particles of the toner to a high enough temperature, the marks being made on the paper are much lighter in colour and appear more faded than typical documents.
In the View Menu (it is located in row at top) click Show Hidden devices. Find the printer that is a ghost and right click it and choose to uninstall it. Your ghost printer should now be gone. Close all open windows.
Ghosting is usually considered the presence of a faint image of a design in solid printing areas that is not intended to receive that portion of the image. This print defect is always in the machine direction and usually is a repeated pattern.
In the Devices and Printers window click on Add a printer. Choose “Add a local printer or network printer with manual settings”, then click Next. Select Create a new port and choose Standard TCP/IP Port, then click Next. Under Hostname or IP address: Type in the IP address of the printer you intend to connect to.
Every printer contains an IP address that allows it to seamlessly connect to your computer (or other devices) through your Wi-Fi network. Here`s everything you need to know about finding your printer IP address—as well as some information about how printer IP addresses work.
Yes, most companies have their printers configured through a print server that keeps track of the user and the documents they print,” reads an article from Workplace Round Table. “Even smaller companies have ways to investigate your printer activity without an IT department.”
Print flows

Print data sent from an application is received by the printer driver. The data is sent to the image controller via the USB interface for USB connection or via Ethernet (TCP/IP, etc.) for network connection. Then the data is passed from the image controller to this machine.

Click [Start] – [All apps] – [Windows Tools] – [Control Panel] – [Hardware and Sound] – [Devices and Printers].
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
If there is no label on your printer you should look through the settings for an option that says print configuration page or print network configuration. On the printed page(s) please then look for the `Host Name` and that will be the printer name.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

Read Full Q/A … :
Unknown Printer

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :
Unknown Printer

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :
Unknown Printer

HP Deskjet 640c wont print??
ANSWER : yes

Read Full Q/A … :
Unknown Printer

My printing come out blurred
ANSWER : doris…There are usually 2 reasons for blurry output on this printer. First, make sure that the alignment is correct. You can get to it from the maintenance tab on the software that came with the printer. The other common cause of blurring is debris under the printhead. Hope this helps.

Read Full Q/A … :
Unknown Printer

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

Read Full Q/A … :
Unknown Printer