Brother MFC 215C

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

First check that the cartridges are correctly inserted and then examine the cartridge chip. If it is dirty, clean it with a cotton swab and a little alcohol, if it is incorrectly set, press it to reset it. Turn off and restart the printer now.
If one or more of the colours are missing from your printed document, the ink cartridges may not be installed correctly or nozzles in the print head may be clogged up. To solve this issue, do the following: Check the print quality and clean the print head. Install a new genuine Brother ink cartridge.
Try disconnecting and reconnecting the USB cable on from both ends. Disconnect both your Brother machine and the computer and reconnect. NOTE: When the USB connection confirmation screen appears, click Allow or Yes. (If you are using a USB hub, remove it and connect your Brother machine directly to the computer.)
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
This is due to several factors such as poor quality ink being used, tanks not being mixed often enough causing sediment to gather at the bottom of the tanks or not being used often enough. All of these factors can cause the black ink or the colours not to print.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
The main culprits are: Weak Wi-Fi signal – Try moving your printer closer to the Wi-Fi router. Incorrect Wi-Fi network settings – See step 2. Software issues such as out-of-date firmware or drivers – See step 3.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!

Read Full Q/A … :

Brother MFC 215C

Brother MFC-9400CN Print Unable 2A FIX
ANSWER : I had that same problem, I have a MFC-9840CDW also. I went in and removed the three components Toner Tray, Transfer belt, and waste toner box. First thing no one mentioned is that you cannot just put your toner tray down when you take it out. Look at the bottom, those are light sensitive drums on the bottom. I put mine on its side with the bottom away from light and then covered it with a small black clean trash bag. Nothing touching the bottom, and protected from light. Also the transfer belt should not be placed down on the actual belt. The belt is basically the width of the unit and very delicate. same thing, on its side and covered with a clean bag. away from kids, dogs, cats, hamsters etc…lol. The waste toner box is safe to put on your desk.

Read Full Q/A … :

Brother MFC 215C

Brother MFC-9840CDW Print Unable 32 Error
ANSWER : That is caused by a sticking solenoid. It’s not that hard to fix, I’ve done a bunch of them. Here is a video that shows how. https://www.youtube.com/watch?v=6Bob34TLrPQ

Read Full Q/A … :

Brother MFC 215C

printer error code unable to print 4f
ANSWER : Follow these instructions:

Read Full Q/A … :

Brother MFC 215C

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :

Brother MFC 215C

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

Read Full Q/A … :

Brother MFC 215C

Print Unable EC
ANSWER : Check out this forum thread for an answer http://www.fixyourownprinter.com/posts/59609

Read Full Q/A … :

Brother MFC 215C

Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.

Read Full Q/A … :

Brother MFC 215C