HP OfficeJet 6500A
I cannot easly print a label off of ebay without a lot of hassle. It worked great before I installed win 10 . I thought I downloaded the driver for win 10 , but it still take a lot of steps to print the label. Any thoughts

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Select print job settings: In the program you are creating the labels with, set the print quality to Normal and the paper type to Plain or Labels, if available. If the entire sheet of labels is misaligned, try adjusting the top and/or left margins in the layout settings.
With the right HP printer, Microsoft Word or a similar program, and high-quality label sheets, you can print your own labels in no time without the cost of going to a print shop.
Absolutely. You don`t need to spend extra on paper to print your shipping and mailing labels. The same paper you use in your inkjet or laser printer is perfectly fine. Creating your shipping and mailing labels in-house can help you control shipping costs.
Thermal printing (or direct thermal printing) is a process which produces a printed image by selectively heating thermal paper when the paper passes the thermal print head. The heat-sensitive paper`s coating turns black in the areas where it is heated, thus producing the required image.
The proper HP printer setting for sticker paper may vary depending on the texture of the surface, but “Labels” is usually the right option. Again, if you`re unsure, look into other user experiences. Someone may have noted the best print setting for a particular material.
In general, laser printers are better for printing waterproof labels or a large quantity of labels with medium-quality color. In contrast, inkjet printers are better for photos and images with color depth and tonal range (i.e. photo quality).
If you have an inkjet printer, fan the paper and load it into the “in” tray with the label side facing down. For laser printers, load the paper into the input tray with the label side facing up. If your laser printer has a priority feed slot, load a single sheet of label paper into it at a time.
5 A4 paper. And of course, an A4 paper can cover a label with size of 4″ x 6″.
Make sure the correct printer is selected, then click the Properties button. Make sure the Orientation is set to Portrait, then click Advanced. Here make sure the Paper Size is set to 100x150mm or a 4×6″ option. Click Ok.
Types of Label Printers: Thermal, Inkjet & Laser | BRADY.
Label printers are printers that are specially designed for printing individual labels. As a rule, label printers have an interface, which means that individual data, such as lot numbers, can be taken from ongoing production or from a database. The labels are then individually printed with this information.
HP OfficeJet Pro 8035e Wireless Color All-in-One Printer. The HP OfficeJet Pro 8035e Printer is one of the best choices for printing stickers in a home office environment. This printer offers exceptional value and quality to ensure that your sticker prints are bold and vibrant.
As stated above, almost any printer will print on vinyl paper.
Direct thermal printing

It does not use any ribbon, ink or toner, but it requires a special type of heat-sensitive material that blackens when heat is applied. Because the label material is heat sensitive, it fades and the label can become hard to read and scan over time.

The main materials used for printing of labels are self-adhesive paper and foil (polypropylene). Rarely self-adhesive metal (aluminum foil of appropriate thickness with a sticky layer) is used.
Make sure that the printable side is facing down when putting it into the printer, and that the paper is flat. Sometimes if the paper has curled edges, it can jam. Also, make sure that that by bending the papers a significant amount, that stickers don`t bend or come off the sheet.
The most common is that the printer hasn`t been calibrated to use the correct amount of heat and pressure. To change this, go to your printer`s settings and check that either the media type or weight is set to `Labels`. Some printers won`t have this option, so instead choose the `Heavy Paper` setting.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP OfficeJet 6500A

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :

HP OfficeJet 6500A

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

Read Full Q/A … :

HP OfficeJet 6500A

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :

HP OfficeJet 6500A

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

HP OfficeJet 6500A

HP Deskjet 640c wont print??
ANSWER : yes

Read Full Q/A … :

HP OfficeJet 6500A

My printing come out blurred
ANSWER : doris…There are usually 2 reasons for blurry output on this printer. First, make sure that the alignment is correct. You can get to it from the maintenance tab on the software that came with the printer. The other common cause of blurring is debris under the printhead. Hope this helps.

Read Full Q/A … :

HP OfficeJet 6500A

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

Read Full Q/A … :

HP OfficeJet 6500A