Canon Pixma IP6000D
Hello, my printer is printing blank pages when I print from the computer using Preview. when I run a test print from the printer, or from utilities in printer, it is printing although faintly, but the nozzle seems to be clean. the printer hasn’t been used in about a year. I reset to factory default and wanted to purge but how do I do that, and will it help? Thanks
Experienced technical support provide their insights in answering this question :
You can’t let an inkjet printer sit that long. Try flushing the heads. Take out all the ink tanks and to the right of the assy. you will see a plastic lever. Lift it and it will release the heads. Take it to the sink and using hot running water, flush it from top and bottom several times. Then blot it dry and reinstall.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Ink cartridges can dry out over time. If they are sitting in your machine for an extended period, they will eventually dry up and become unusable. The simplest way to combat this problem is by printing more frequently or running regular cleans and ink tests to ensure the nozzles remain clean.
Dried Ink Buildup on the Printhead
If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.
Read Full Q/A … :
Canon Pixma IP6000D
printing blank pages
ANSWER : I assist the binary alternatives for really a while, and only half a year ago I identified to enhance the strategy for a greater, she called for support Bing and he offered me this web site http://option-strategies.org Now I focus on the suitable approach for themselves, and details gone up. I think every one confronted using this problem. I think my estimation is going to be advantageous to you.
Read Full Q/A … :
Canon Pixma IP6000D
HP Officejet 860 printer printing blank pages
ANSWER : First check the exact ink levels, replace if any one are low or empty.
Read Full Q/A … :
Canon Pixma IP6000D
HP Laserjet 4000 Printing Blank Pages
ANSWER : Would just like to say thank you to every one. I am a teacher and need my printer for a ridiculous amount of paper work that keeps me away from working with students. My printer was down for 5 school days. I finally got the new toner and it still didn’t print. After following your meticulous instructions I was able to get it working. Thank you Thank you Thank you to all people who contributed to this.
Read Full Q/A … :
Canon Pixma IP6000D
printing blank pages
ANSWER : You can’t let an inkjet printer sit that long. Try flushing the heads. Take out all the ink tanks and to the right of the assy. you will see a plastic lever. Lift it and it will release the heads. Take it to the sink and using hot running water, flush it from top and bottom several times. Then blot it dry and reinstall.
Read Full Q/A … :
Canon Pixma IP6000D
HP Color Laserjet blank pages – only jetdirect page
ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.
Read Full Q/A … :
Canon Pixma IP6000D
mx892 prints only blank pages
ANSWER : Same problem, wondering what to do now ? What model did the print head go into that is the same ?
Read Full Q/A … :
Canon Pixma IP6000D
HP LaserJet 2200D won't print configuration page
ANSWER : Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:
Read Full Q/A … :
Canon Pixma IP6000D