HP PSC – Printer / Scanner / Copier 1315V
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.
The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
Make sure your Wi-Fi network and printer setup meet connection requirements. Restart the printer and the computer or mobile device to clear possible error conditions. Make sure the printer is not connected to a computer with a USB cable.
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Running out of ink
If your printer runs out of ink, obviously the pages will come out blank when you attempt to print out what you need. Most of your HP printers will already have some kind of indicator to let you know that you are running slot. Solution: The solution is a no-brainer. Replace the ink cartridges.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Printer not printing
Try removing the inks, turn the printer upside down and shake it and see what falls out.
HP Officejet 860 printer printing blank pages
First check the exact ink levels, replace if any one are low or empty.
Printer is printing everything in green
My printer is an Epson Stylus SX535WD
when printing front and back, the front will print well but the back will fade
It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Printer won't print
Wow, you’re just a wealth of information. Take it in for service or buy a new one.
my printer prints only cyan and black
If it was printing OK before you refilled the cartridge and you cleaned the heads, then your only other option would be to replace the cartridge.
Difference Between Laser Printer and InkJet Printer
Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.
Printer will not print
Remove the ink cartridge and close printer back up…you should get a message that cartridge is missing. Reinstall cartridge and see if it corrects the trouble. If it does not you may need to reinstall the printer.