Epson Stylus Photo 780

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Reasons for Epson printer will not print from computer

Jammed paper. Ink cartridge issue. No paper is installed. Outdated printer driver.

Make sure the USB cable is connected securely at both ends and meets the requirements. Run a printer check. If the test page prints, make sure your software is installed correctly. Make sure the printer cover is closed.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Why is my Epson printer not printing? Make sure your printer is on. Check if the cable is properly connected from the computer to your Epson printer. If you are using wifi, check if the devices are connected to the same network.
If you have problems feeding paper, try these solutions: If paper does not feed for printing, remove it from the rear feed slot or cassette. Reload it, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette or rear feed slot.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists. If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds.
Windows & Linux: Ctrl + p. Mac: ⌘ + p.
Sometimes, the Printer cartridge clogs down because of ink flow. In that case, you should clean the Clodges from it using a pin or something else. You can fix the “Epson printer not printing black” ink issue by cleaning its printhead using the distilled water, and sponges.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
The printer will not operate if a black ink cartridge is expended or any cartridge is removed. If a color cartridge is expended, you may be able to continue printing temporarily with black ink. It`s best to always have extra cartridges on hand.
There are a few telltale signs that your 3D printer nozzle could be clogged. Material stringing, missing layers, clicking sounds in your extruder gears, and inconsistent extrusion patterns—specifically thin layers—are all symptoms of a partially clogged nozzle.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
Low-quality paper leaves an accumulation of tiny paper bits often referred to as “paper dust” inside the machine. This “dust” is one of the top causes of paper jams. More dust means more jams. Besides jams, the dust also contributes to poor-quality prints and causes machine parts to wear at a faster rate.
Clean the printhead weekly. Some applications may require more frequent cleaning. Check your printhead regularly. Operation in unusual conditions may require more frequent cleaning.
If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Turn the printer off then back on. If the issue persists, turn the printer off, unplug the power cord and then wait at least three minutes before plugging the power cord back in and turning the printer back on.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Printer not printing
ANSWER : Try removing the inks, turn the printer upside down and shake it and see what falls out.

Read Full Q/A … :

Epson Stylus Photo 780

HP Officejet 860 printer printing blank pages
ANSWER : First check the exact ink levels, replace if any one are low or empty.

Read Full Q/A … :

Epson Stylus Photo 780

Printer is printing everything in green
ANSWER : My printer is an Epson Stylus SX535WD

Read Full Q/A … :

Epson Stylus Photo 780

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :

Epson Stylus Photo 780

Printer won't print
ANSWER : Wow, you’re just a wealth of information. Take it in for service or buy a new one.

Read Full Q/A … :

Epson Stylus Photo 780

my printer prints only cyan and black
ANSWER : If it was printing OK before you refilled the cartridge and you cleaned the heads, then your only other option would be to replace the cartridge.

Read Full Q/A … :

Epson Stylus Photo 780

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :

Epson Stylus Photo 780

Printer will not print
ANSWER : Remove the ink cartridge and close printer back up…you should get a message that cartridge is missing. Reinstall cartridge and see if it corrects the trouble. If it does not you may need to reinstall the printer.

Read Full Q/A … :

Epson Stylus Photo 780