printer mp130

At times, this error appears as a status on the driver software installed on the Windows OS. Generally, this error happens if the printer driver isn`t up-to-date or is corrupt, or new Windows updates are needed. Corrupt and incompatible printer drivers, however, are the most common causes of this problem.

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.

Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.

Place the printer near the Wi-Fi router. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard. Select the name of your network, and then enter the password to complete the connection.

Download the driver from the HP website to complete the setup with your Windows computer. Turn on the scanner. If your scanner is connected to the computer with a USB cable, disconnect the cable from the scanner. The software installation prompts you to connect the cable if needed.

In multifunction or all-in-one printers, fax machines, photocopiers and scanners, an automatic document feeder or ADF is a feature which takes several pages and feeds the paper one page at a time into a scanner or copier, allowing the user to scan, and thereby copy, print, or fax, multiple-page documents without having …

HP 1100, 1200 – While the printer is on, press and hold the Go button for 5 seconds. This will reset the printer.

On the printer control panel, press the OK button to display the Home screen. Use the arrow buttons to navigate to and open the following menus: Setup → Network Setup → General Settings. On the General Settings menu, select Show the IP Address, and then select Yes to display the printer`s IP address or host name.

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.