HP LaserJet 5MP

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper. If thick media does not feed, make sure you are loading it straight into the product, not at an angle. If paper jams when you print on both sides of the paper, try loading fewer sheets.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject.
With dot matrix printers, paper is often feed through pins on a wheel that grab and slowly move paper through the printer. With inkjet and other page printers, paper is fed through the printer with rollers that grab and move the paper through the printer.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
An automatic document feeder (ADF) is a mechanism found on devices like printers, fax machines, photocopiers, and scanners that feeds multiple sheets of paper into a scanner or copier to copy, print, or fax multipage documents in a single operation.
Common causes of paper jams include: Damaged rollers. Inserting paper that is incompatible with the printer. Loading the paper incorrectly.
Once properly clean, they will perform better, but to get them like new again, you should apply a restoring compound which lubricates the rollers and restores their tackiness. Oritech has a Rubber Roller Restorer that you an use on the rollers, for approximately $15, that will last you a life time.
Shut down the computer, then press the paper button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press paper button to resume printing.
Shut down the computer, then press the paper button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press paper button to resume printing.
Once properly clean, they will perform better, but to get them like new again, you should apply a restoring compound which lubricates the rollers and restores their tackiness. Oritech has a Rubber Roller Restorer that you an use on the rollers, for approximately $15, that will last you a life time.
Shut down the computer, then press the paper button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press paper button to resume printing.
Once properly clean, they will perform better, but to get them like new again, you should apply a restoring compound which lubricates the rollers and restores their tackiness. Oritech has a Rubber Roller Restorer that you an use on the rollers, for approximately $15, that will last you a life time.
Once properly clean, they will perform better, but to get them like new again, you should apply a restoring compound which lubricates the rollers and restores their tackiness. Oritech has a Rubber Roller Restorer that you an use on the rollers, for approximately $15, that will last you a life time.
Shut down the computer, then press the paper button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press paper button to resume printing.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP LaserJet 5MP

Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.

Read Full Q/A … :

HP LaserJet 5MP

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :

HP LaserJet 5MP

Help the cover on the back of my printer is lost and my printer keeps on shooting out paper from the back end with no writing on it?
ANSWER : There are no parts available, therefore no solution to your problem.

Read Full Q/A … :

HP LaserJet 5MP

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :

HP LaserJet 5MP

Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.

Read Full Q/A … :

HP LaserJet 5MP

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :

HP LaserJet 5MP

Who Provides Best printer support services
ANSWER : Do they all speak English as good as you do? Wow, looked at the website. You would like think that you could find someone who spoke English as their first language to write it. It reads like a bad Google translate.

Read Full Q/A … :

HP LaserJet 5MP