Canon Pixma MP460
What does this indicate? Does something need to be replaced?

Experienced technical support provide their insights in answering this question :
Read these solutions http://community.usa.canon.com/t5/Printer-Multifunction-Support/error-b200/td-p/217

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

You can try performing a reset of the printer. While the printer is on, unplug the power cord from the printer and let it sit for 60 seconds. While the power is off, press the power button 5 times. After 60 seconds plug the power cord back in and power on the printer.
Canon printer error: “Error e02”

Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.

A Canon B200 Printer Error usually points to a defective print head, which is an essential printer component. It`s responsible for distributing ink from the cartridges into the paper printout.
The B200 error indicates a faulty print head at its most basic level. A print head is a part that distributes the ink from the cartridges onto the paper, meaning it`s one of the most critical aspects of the entire printer. Print heads can be problematic, especially on cheaper printers.
Turn the printer OFF. Check that the Main Power indicator is off. Turning ON the printer while pressing the reset button (A) initializes the system settings. Press the reset button with the tip of a pen, thin pin, or similar item.
I will be glad to help. An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper.
(B) Color Ink lamp. (C) Black Ink lamp. Color Ink lamp or Black Ink lamp lights. The ink is running low. Prepare a new ink cartridge.
The B200 error often indicates that there is a faulty print head. The print head is a very important part that distributes the ink from the cartridge onto the paper. In addition, the incompatible printer driver, bad cartridge, and obstructions are responsible for the Canon B200 error.
The Mercedes Benz B Class (W245) B200 has a Inline 4, Petrol engine with 2034 cm3 / 124.1 cu-in capacity.
Press Setup. Press the arrow buttons until you navigate to Device settings and then press OK. Press the arrow buttons until you navigate to Reset setting and then press OK. Press the arrow buttons until you navigate to Reset all and then press OK.
You have two options to factory reset Canon printers. One method is to use the Reset button, while the other is to utilize the Setup option.
The B200 error with canon printer means `Printhead Temperature exceeded`. That is while you perform printing process, one or more of the printhead ink would run out of ink and the printing process would be continued without ink. As a result the printing without ink might cause overheating of the print head nozzles.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
Solution. Error 2 is a network error code produced by Windows NT that generically translates to: “The system cannot find the file specified.”
a misprint or misspelling in a text.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Error code B200 (or related errors B201 / B202 / B203 / B204 / B205 / B206 / B207) generally means that print head communication has failed and that your printer will require service or replacement.
To find an authorized Canon Dealer near you, please call (800) OK-CANON. Genuine Canon replacement service parts, including inkjet printer print heads are available to purchase by calling the Canon Parts Order Desk at (866) 481-2569.
Ink tank is not installed properly./Ink may have run out. If the lamp on the ink tank is not lit, the ink tank may not be installed properly. Install an appropriate canon ink cartridge. If the lamp on the ink tank is flashing, ink may have run out.
B = Battery. This means that the printer can be powered by battery if needed. BT = Bluetooth. Allows you to print by bluetooth.
Description. Error code B200 (or related errors B201 / B202 / B203 / B204 / B205 / B206 / B207) generally means that print head communication has failed and that your printer will require service or replacement.
Mercedes-Benz B Class uses sturdy tubeless radial tyres of size 225/40 R18. for these tyres recommended tyre pressure is between 30-35 PSI. 35 PSI will give you better fuel economy while 30 PSI can be used for a smoother and more comfortable ride.
While the printer is on, unplug the power cord from the printer and let it sit for 60 seconds. While the power is off, press the power button 5 times. After 60 seconds plug the power cord back in and power on the printer.
Press the Setup button until “11” appears on the LCD and press the Black button or the Color button. The network settings are initialized.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Printer error Oxc18a0201
ANSWER : Have no idea what model you have, but try this forum post or search through the site using your model and error.

Read Full Q/A … :

Canon Pixma MP460

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :

Canon Pixma MP460

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :

Canon Pixma MP460

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :

Canon Pixma MP460

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

Canon Pixma MP460

canon printer error
ANSWER : Here are the procedure to fix Canon smartbase MP730 printer error ##334

Read Full Q/A … :

Canon Pixma MP460

printer error fix
ANSWER : Epson 2540

Read Full Q/A … :

Canon Pixma MP460

Canon i255 printer head error
ANSWER : Sometimes the print head issues are brought on not by a flawed print head but rather by a “gunky” stopping station. The stopping station is the spot where the print head “rests” when it is not printing. Generally it’s on the right half of the printer (taking a gander at the printer from the front). The stopping station has elastic seals that should encompass the print head when it’s stopped.

Read Full Q/A … :

Canon Pixma MP460