HP PSC – Printer / Scanner / Copier 1310

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Improper placement or installation of the print cartridges can cause a carriage stall error condition. Follow these instructions to remove the print cartridges. Make sure the printer is turned on. Open the print cartridge access door, and then wait until the print carriage is idle and silent.
If your printer won`t print, a print job has stopped unexpectedly, or you received a “carriage jam” error, your printer carriage is likely jammed. These jams occur when the carriage holding the ink cartridges stalls in the printer. Carriage jams sometimes occur after a paper jam.
Make sure the carriage moves freely

Open the exterior door, and then open the printhead access door. With the printer turned on, disconnect the power cord from the rear of the printer. Unplug the power cord from the power source or electrical outlet. Move carriage to the right side and try to remove the hose manually.

Why the Printer Cartridge won`t Move. A paper jam is usually the reason why an HP printer cartridge gets stuck on the right side. Pushing the paper excessively into the printer, on the other hand, is the most common cause of a paper jam. You should only push the paper until the first resistance.
If your printer won`t print, a print job has stopped unexpectedly, or you received a “carriage jam” error, your printer carriage is likely jammed. These jams occur when the carriage holding the ink cartridges stalls in the printer. Carriage jams sometimes occur after a paper jam.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Turn off the printer, and then unplug the power cord from the electrical outlet. Remove any paper from the input tray. Open the rear access door, and then clean the paper feed rollers with a lint-free cloth lightly moistened with filtered water. Wait 10 minutes for the rollers to dry.
Most commonly “Cartridge Problem” means that your HP printer simply cannot recognise the colour or black ink cartridges. Thankfully however this error message can usually be cleared with some basic troubleshooting.
Get a flat something to use as a pry bar. I would suggest the back of a spoon handle, or a dull table knife. Insert the pry bar between the top of the cartridge and the underside of the carriage slot. Slide it forward and then gently lift the pry bar slightly, just enough to allow the cartridge to be pulled free.
Turn the printer off then back on. If the issue persists, turn the printer off, unplug the power cord and then wait at least three minutes before plugging the power cord back in and turning the printer back on. If the issue persists, ensure the product is running the latest firmware available from HP.com.
Why the Printer Cartridge won`t Move. A paper jam is usually the reason why an HP printer cartridge gets stuck on the right side. Pushing the paper excessively into the printer, on the other hand, is the most common cause of a paper jam. You should only push the paper until the first resistance.
Why the Printer Cartridge won`t Move. A paper jam is usually the reason why an HP printer cartridge gets stuck on the right side. Pushing the paper excessively into the printer, on the other hand, is the most common cause of a paper jam. You should only push the paper until the first resistance.
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

printer not working
ANSWER : Not knowing which printer model (out of over1200) it’s hard to say how to clean the print head. Without the make and model number there is no way we can offer any sound advice.

epson printer problems
ANSWER : My Printer Has A Internal Erro

HP Laserjet printer page counter backward move
ANSWER : On all HP laserjet printers if you power them off the page count will decrease back to the nearest 10. For example, if the page reading is 123,799 and you power it off, the page count will go back to 123,790.

All panel lights blinking, printer doesnt respond
ANSWER : This is very easy process, you must change a new one

printer error fix
ANSWER : Epson 2540