Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check1 Make sure that the printer is turned on. Check2 Make sure that the Wi-Fi lamp is lit on the front side of the printer. If the Wi-Fi lamp is off, Wireless LAN is inactive. To activate Wireless LAN, press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes white 10 times.
The printer driver may not be installed correctly. Uninstall and re-install the printer driver. – Make sure that there is a direct connection between the printer and USB port of the computer. Reboot the computer with the printer`s USB cable unattached and reconnect the cable once the computer has restarted.
The easiest way to connect the Canon printer to the computer is via a USB cable. It`s the traditional method of connecting devices. One end of the USB remains connected to the printer, and the other must be connected to the computer`s USB port.
Check cables or wireless connection

Make sure that the printer`s USB cable is properly connected from the printer to your PC. If your USB isn`t recognized, see Automatically diagnose and fix Windows USB problems. Check the wireless connection (for wireless printers).

Check Cables and Printer USB Ports

Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.

Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
Connect your printer via a USB cable

Simply plug one end of the cable into the USB port on the Canon printer and the other into the USB port on your computer. Then, plug in the power cable and turn on the printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :
Unknown Printer

canon printer error
ANSWER : Here are the procedure to fix Canon smartbase MP730 printer error ##334

Read Full Q/A … :
Unknown Printer

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :
Unknown Printer

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :
Unknown Printer

Canon MG6450 printer stopped brinting black colour
ANSWER : Hi there

Read Full Q/A … :
Unknown Printer

Canon Pixma Pro 9000 Mark II ink dried in printer head.
ANSWER : This video shows how to remove the heads. Ignore his methods of cleaning them as they are really stupid. Best way to clean the heads is to run hot tap water into the screens and then flip it over and run the hot water on the heads. Repeat a few times until the water runs clear. Then dry it thoroughly with a paper towel and reinstall.

Read Full Q/A … :
Unknown Printer

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Read Full Q/A … :
Unknown Printer

Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.

Read Full Q/A … :
Unknown Printer