How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If the nozzle check page does not print satisfactorily, you may need to repeat the head cleaning and print the nozzle check pattern again. If print quality hasn`t improved after repeating this procedure four or five times, turn the printer off and leave it alone overnight.
After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning. Turn off the product.
If your Epson printer is printing out faint images, skipping lines, or is streaking your image with lines, chances are you have a clogged nozzle–a common problem many users have with Epson printers. It`s unavoidable that print heads clog over time as small amounts of ink residue dry up and collect in the nozzles.
The Power Cleaning utility allows you to replace all of the ink inside the ink tubes. In the following situations, you may need to use this feature to improve the print quality. You printed or performed head cleaning when the ink levels were too low to be seen in the ink tank windows.
Dried Ink Buildup on the Printhead
If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.
Another way to tell that your print heads are dirty is if your print jobs come out partially printed or streaky. If your printer display says that you`re low on ink but you have a full cartridge, this may also be a sign of a dirty printhead.
In the majority of cases, printers` self-cleaning mechanisms clean blocked printer heads by flushing the nozzles with air. The air works to dislodge dry ink inside the cartridge channels and also push it out.
Clean the interior of the printer every 6 months or 300 hours of operation, whichever comes first. Clean and remove paper waste, dirt, dust and ribbon shreds. suction nozzle. Do not clean any interior working parts with the suction nozzle to avoid possible damage to the printer.
If your printer is spitting out pages full of strange characters, symbols, or strange formatting, your inkjet printer drivers may be outdated, incompatible with your operating system or corrupt. Drivers are important to the proper function of your inkjet printer and it is best to check for updates regularly.
If your computer entered sleep mode the last time you printed, the next print job after your computer exits sleep mode may contain garbled characters. Print your document again. Windows or Mac: Make sure you are using the printer software for this product.
Power Cleaning Using the Product Control Panel
You can run a Power Cleaning using the control panel on your product. Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before printing a nozzle check pattern and running another Power Cleaning or Print Head Cleaning.
The printer starts system cleaning of the print head. Do not perform any other operations until the printer completes system cleaning of the print head. This takes about 6 minutes.
If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Use a support sheet with special paper, or load special paper one sheet at a time. Make sure your paper meets the specifications for your product.
Run a nozzle check to confirm that the print head is clean. You may need to clean the print head up to 4 times. You can also turn off your Epson printer and wait at least 6 hours. Then try printing again.