Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

You can view your machine`s page counters for copies, printed pages, reports and lists, faxes, or a summary total.
Right-click the icon for your product, and then select Properties from the drop-down menu. Click the General tab, and then click Printing Preferences. Click the Basics tab, and then click About. Locate the page count at the bottom of the About This Driver screen.
Yes. You can check the printer`s usage log by printing a printer information report from your printer. Use Device Settings in the Printer Setting Tool (for Windows) or the Printer Setting Tool (for Mac)* to confirm the printer information report setting.
Click on the Brother Printer Driver and click Open print queue. Cancel the print jobs. To cancel all documents click Printer => Cancel All Documents (or Purge Print Documents). To cancel only chosen print jobs, click on the specific job to highlight it.
Windows 10: Right-click and select Control Panel > Hardware and Sound > Devices and Printers. Right-click your product name and select Printer properties.
Printers are configured in the Printers section of the Windows Control Panel. Printer Settings: Displays the printer settings window associated with the selected printer. The desired paper size, among other settings, can be selected in the printer settings window.
Click Windows/start -> (All) Programs -> Brother -> [model name] -> ControlCenter. The ControlCenter application will be loaded in the Task Tray near the system clock. (It appears as a blue square.)
Included standard cartridges Approx. 200 pages High Yield cartridges Approx.
Standard toner cartridges print approximately 1,500 A4 or Letter-size single-sided pages. Approx. cartridge yield is declared in accordance with ISO/IEC 19752.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Brother MFC-9400CN Print Unable 2A FIX
ANSWER : I had that same problem, I have a MFC-9840CDW also. I went in and removed the three components Toner Tray, Transfer belt, and waste toner box. First thing no one mentioned is that you cannot just put your toner tray down when you take it out. Look at the bottom, those are light sensitive drums on the bottom. I put mine on its side with the bottom away from light and then covered it with a small black clean trash bag. Nothing touching the bottom, and protected from light. Also the transfer belt should not be placed down on the actual belt. The belt is basically the width of the unit and very delicate. same thing, on its side and covered with a clean bag. away from kids, dogs, cats, hamsters etc…lol. The waste toner box is safe to put on your desk.

Read Full Q/A … :
Unknown Printer

Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!

Read Full Q/A … :
Unknown Printer

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :
Unknown Printer

Brother MFC-9840CDW Print Unable 32 Error
ANSWER : That is caused by a sticking solenoid. It’s not that hard to fix, I’ve done a bunch of them. Here is a video that shows how. https://www.youtube.com/watch?v=6Bob34TLrPQ

Read Full Q/A … :
Unknown Printer

printer error code unable to print 4f
ANSWER : Follow these instructions:

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer

'wont print
ANSWER : http://www.brother-usa.com/FAQs/Solution.aspx?FAQI…

Read Full Q/A … :
Unknown Printer

Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W

Read Full Q/A … :
Unknown Printer