Canon Pixma IP1500

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.
Check to make sure there are no paper jams or other obstructions. Unplug the printer for approximately two minutes, then plug it back in.
Fifteen Flashes:Ink tank cannot be recognized

An Ink tank error has occurred. (The lamp on the ink tank is off.) Replace the ink tank. This section describes the procedure to replace an ink tank if ink runs out while printing is in progress.

Alarm LED Flashes Orange

16 flashes indicates the ink has run out. Action to correct the error: Replace the ink tank and close the Top Cover.

On a printer, an orange light usually indicates a problem related to printing activity. A blinking orange light can mean the printer is trying to print something, but is low on ink, out of paper, or there`s a paper jam.
Your printer`s cyan ink supply.

If the ink cartridge in your printer is out of cyan or the head is clogged preventing it from reaching the nozzles in the printer, then only the yellow and magenta inks will be printed on the paper. This will give the picture a reddish/orange/yellow tint.

If your Canon ink cartridges are not printing as expected and you are getting streaky or light prints, you can try running the cleaning function on your PIXMA printer to fix the issue. This cleaning function cleans the printhead inside your printer, which works with your printer cartridges to create a print.
Ten flashes: The Front Tray is not set to its correct position./The Front Tray was moved during printing. When printing from the Rear Tray, return the Front Tray to its normal printing position, make sure that paper is loaded in the Rear Tray, then press the RESUME/CANCEL button on the printer to resume printing.
Four flashes – The cartridge is not installed properly. Five flashes – The cartridge is not installed properly. Seven flashes – The cartridge is not installed in the correct position.
– ON lamp flashes green: The machine is getting ready to print, or printing is in progress. – Alarm lamp flashes orange: An error has occurred and the machine is not ready to print. – ON lamp flashes green and Alarm lamp flashes orange alternately: An error that requires contacting the service center may have occurred.
This vibrant hue symbolizes adventure, ambition, creativity, and sociability. Orange is often associated with positivity.
The hex code for orange is #FFA500.
The orange exclamation point usually indicates one of the following issues has occurred, Insufficient power, There is a paper jam in the printer. The top cover is open. No paper was loaded in the tray or the tray was not loaded properly. The printer goes into sleep mode or standby mode.
CMYK Colour Mode

CMYK (Cyan, Magenta, Yellow, Key/Black) is the colour space for printed materials, so you should be using the CMYK colour profile for any design that will be physically printed.

Meaning: the paper exit tray is closed / Paper jam. Solution: the paper is jammed. Remove the jammed paper, replace the paper correctly in the printer, and then press the Resume / Cancel button.
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Four flashes: The ink tank is not installed./Ink tank is not installed properly./Ink may have run out. The ink tank is not installed. Install the ink tank.
Hold the on/off button and press the stop button 5 times. Release the on/off button. The printer resets itself and restarts automatically afterwards.
On the Maintenance tab, click View Printer Status. Display Estimated ink levels. Ink status is displayed as an illustration. The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your printer.
Prints that appear more green are commonly caused by an absence of magenta ink/toner being put to paper by your printer. In addition to your prints looking “greener” you may also notice yellow and blue areas appear almost neon due to the the magenta not being able to give them more realistic tones.
The yellow triangle on the printer is the alarm lamp of the printer; if it is lit, it indicates that there is an item that needs to be addressed on the printer.
Prints that appear more green are commonly caused by an absence of magenta ink/toner being put to paper by your printer. In addition to your prints looking “greener” you may also notice yellow and blue areas appear almost neon due to the the magenta not being able to give them more realistic tones.
Light flashes orange. If you see the orange light flash as below: (A), then (A) again, count the number of flashes and refer to the table below for help. Machine is out of paper or paper does not feed. Reload the paper and press machine`s Black or Color button.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

canon MX700 6A80 error, head locked
ANSWER : I bought a canon pixma 7240 but on my first use I turn it on and the power lamp and error lamp blink alternatively the print head is stuck not moving please help I can’t even put the cartridges. My email [email protected] phone number 0719013770.

Read Full Q/A … :

Canon Pixma IP1500

Waste tank counter reset code for Canon printers.
ANSWER : I have a Canon Pixma MG4150 and I never see any references to it on help pages. I too want to get rid of the ink absorber warning after havig cleaned and reinstalled the absorber pads. Can anyone help?

Read Full Q/A … :

Canon Pixma IP1500

Canon Pixma MX870, Error 6000 and Service Manual
ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?

Read Full Q/A … :

Canon Pixma IP1500

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon Pixma IP1500

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Canon Pixma IP1500

Canon PIXMA MP 210
ANSWER : Mine was grabbing the paper from the right side only (where the roller is), sucking the paper in partway and then going sideways and jamming. I cleaned off the roller to no avail. Then I picked the printer up and looked in the paper slot and found a small screwdriver lying sideways so deep you almost couldn’t see it. I got that out and now it works fine!

Read Full Q/A … :

Canon Pixma IP1500

CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html

Read Full Q/A … :

Canon Pixma IP1500

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon Pixma IP1500