Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings. In the Reset settings menu, select the desired area you want to set back to the factory defaults.
Restart your computer – this often will recover any lost connections with wireless devices. Power off and on the printer, and even the access point or wireless router your printer connects to. Check your printer configuration – you may not be assigned to the correct port for the printer.
Simply turn the printer off with the power button on the printer. Once turned off, disconnect the printer`s power cord from the back of the printer. Wait approximately 30 seconds before you reconnect it. Once reconnected, use the printer`s power button to turn the printer back on.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
How to Reset Canon Pixma Ink Cartridge. In many cases, you can press and hold the “ok” or “resume” button on the front of the printer for about 10 seconds. This prompts resetting Canon ink cartridge and should allow you to continue printing.
The printer drops the network connection, resets its network settings to their factory defaults, and prints a Printer Configuration label and a Network Configuration label.
Simply turn the printer off with the power button on the printer. Once turned off, disconnect the printer`s power cord from the back of the printer. Wait approximately 30 seconds before you reconnect it. Once reconnected, use the printer`s power button to turn the printer back on.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :
Unknown Printer

Removing the print head on a Pixma MX 475?
ANSWER : Take out the ink tanks. On the right side there is a plastic release lever. Lift it up and the heads will unlock. Reach in and remove the heads. Take it to the sink and run hot water through the screens on top and then flip it over and run hot water over the heads. Repeat a few times until the water is clear. Reinstall and try again. It might take a couple pages for the print to look good.

Read Full Q/A … :
Unknown Printer

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :
Unknown Printer

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

Read Full Q/A … :
Unknown Printer

Pixma iP3000, Clogged Cyan print head?
ANSWER : I have had similar problem with an IP3600, but only since upgrading OS from WindowsXP to Windows7 a few weeks back, and only with the PG fat Black ink.

Read Full Q/A … :
Unknown Printer

ip3000 pixma fried with 240 volts
ANSWER : You will probably need a power supply and possibly a control board (unless it survived). There may be more than that which fried as well…without doing an electrical diagnostics it’s hard to say.

Read Full Q/A … :
Unknown Printer

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :
Unknown Printer

Pixma MX725
ANSWER : In binary options trading depends directly on simply how much you know the strategies and what broker you will work! I for myself leafing through plenty of techniques but the very best techniques was included with the journal http://options24.net recommend to use. Broblemy with brokers is not unusual, and they need to take established only. It absolutely was there that collected tested. Thank you for your attention, I really hope to greatly help in your problem)))

Read Full Q/A … :
Unknown Printer