Canon Bubblejet (BJ) Note
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The Canon 5200 error is often related to the ink levels present in printer cartridges. Turning your printer off and on again can reset the printer`s mechanism for reading ink levels and get you back to printing in no time.
Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, service is required. For support and service options, sign into (or create) your Canon Account from the link below.
The error 5200 is connected to ink levels and usage within your printer. Issues such as low ink levels, a defective ink cartridge or a dirty printhead can trigger this error.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
The 5200 error would point to a problem with the print head in the MB2720 or a problem with the ink system. If you have tried turning the printer off and on and the inks are seated properly, it looks like the printer needs service.
Solution. There are several reasons for Error 5100 to appear, including a paper jam, an improperly seated ink tank, and more. Encoder (Timing) Strip on the printer needs cleaning. Manual cleaning can be done on some models.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Select Start , then select Settings > Devices > Printers & scanners . Under Printers & scanners, find the printer, select it, and then select Remove device. After removing your printer, add it back by selecting Add a printer or scanner.
The 5200 error would point to a problem with the print head in the MB2720 or a problem with the ink system. If you have tried turning the printer off and on and the inks are seated properly, it looks like the printer needs service.
The 5200 code is a general hardware error. I recommend performing a reset of the printer. While the printer is on, unplug the power cord from the printer and let it sit for 60 seconds. While the power is off, press the power button 5 times.
The 5200 code is a general hardware error. I recommend performing a reset of the printer. While the printer is on, unplug the power cord from the printer and let it sit for 60 seconds. While the power is off, press the power button 5 times.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.
Read Full Q/A … :
Canon Bubblejet (BJ) Note
Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.
Read Full Q/A … :
Canon Bubblejet (BJ) Note
Dreaded 6000 Error Code
ANSWER : Did you read this forum thread? http://www.fixyourownprinter.com/posts/71048
Read Full Q/A … :
Canon Bubblejet (BJ) Note
Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.
Read Full Q/A … :
Canon Bubblejet (BJ) Note
printer error fix
ANSWER : Epson 2540
Read Full Q/A … :
Canon Bubblejet (BJ) Note
Printer error Oxc18a0201
ANSWER : Have no idea what model you have, but try this forum post or search through the site using your model and error.
Read Full Q/A … :
Canon Bubblejet (BJ) Note
Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.
Read Full Q/A … :
Canon Bubblejet (BJ) Note
Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.
Read Full Q/A … :
Canon Bubblejet (BJ) Note