Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.
In Windows, search for and open Add a printer or scanner . Click Add a printer or scanner, and then wait for Windows to locate available printers. If your printer is found, click it, and then click Add device to complete the driver installation.
Start by checking your hardware

If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.
Right-click Start , then select Settings > Bluetooth & devices > Printers & scanners. Find the printer, select it, then select Remove. After removing your printer, add it back by selecting Add device. Wait for your device to find nearby printers, choose the one you want, then select Add device.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button. The Attention and Ready lights cycle while the product restores factory defaults.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Check the USB cable for damage and recommended length, and then restart your printer and computer. Turn off the printer and the computer. Disconnect the USB cable from the computer and printer, and then inspect the cable. If the cable is damaged or longer than 3 m (9 ft 10 in), replace it.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

hp 1115 paper jam
ANSWER : 1. Unplug the power cord and open the print cartridge access door.2. Pull out any jammed paper or other foreign material you were not able to remove from the rear. Pull the paper slowly and carefully to avoid tearing it or damaging the print mechanism.3. Make sure the print cartridge latches are down and securely fastened.4. The print cartridge carriage should be on the right side of the unit. If it is not, gently move it with your fingers to the center. If it will not move, click the link at the top of this page to contact HP.5. Remove any paper or other foreign material under or around the print cartridge carriage. Look in both the right and left sides, inside the printer.6. Close the print cartridge access door, plug the power cord back in, and turn the product on.7. If the error still occurs, unplug the power cord and open the print cartridge access door.8. Gently move the print cartridges all the way to the right side of the printer.9. Unlatch and remove the cartridges.10. If either cartridge is damaged, replace it. Reinstall the undamaged cartridges (the printer can print with only one cartridge installed).11. Close the print cartridge access door, plug the power cord back in, and turn the product on.

Read Full Q/A … :
Unknown Printer

Front panel under front door (holds developer & toner installation area)
ANSWER : Not familiar with that model, but all doors have a peg on each side that go into holes in the frame. Did you try putting one peg in and then flexing the door to get the other one in. Without seeing it, that’s the best I can offer.

Read Full Q/A … :
Unknown Printer

erro message (install genuine hp cartridge)
ANSWER : It seems like it might be a 4240 board. The 4240 was pretty much the same printer, but sold for $200 less. The downside is that it wouldn’t accept the 42X cartridges.

Read Full Q/A … :
Unknown Printer

HP PSC 1610 – problem installing hardware
ANSWER : If you want to get proper detailed information about hp printer then you should call on 1-888-924-2961 toll free number. They provide you step by step methods of installation process and driver support services.

Read Full Q/A … :
Unknown Printer

Error message "Cannot recognize the following cartridge(s). Install them correctly."
ANSWER : The cartridges all have chips on the bottoms. Only thing you can try is cleaning the chips and the contacts in the cartridge holder assy.

Read Full Q/A … :
Unknown Printer

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :
Unknown Printer

Just installed new epson ink and have red light on
ANSWER : t60 fatal error

Read Full Q/A … :
Unknown Printer

After Win got installed my printer prints off the page
ANSWER : Seems the problem only occurs when I tell the printer to print portrait

Read Full Q/A … :
Unknown Printer