HP LaserJet 6

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The error is caused by cartridge not supplying enough ink to the printhead. Step 1: Make sure the cartridge can supply enough ink to the printhead. Refill the cartridge to full. If you use refillable cartridge, make sure to tear off the yellow sticker and expose the air hole.
An Er/04, Er/05, or Er/06 error message indicates a paper jam. Find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
The error indicates a carriage jam issue. With the printer turned on, disconnect the power cord from the rear of the printer. Unplug the power cord from the wall outlet. Wait at least 60 seconds.
An ink system failure error, the `0xc19a0013` error code appears in the printer Control panel. The error can occur due to many reasons, the most common ones being the following: The printer cartridges are not installed correctly. The printer cartridge is low.
The error code 0xc0000001 indicates system files are corrupted. Possibly this can be fixed by entering windows SAFE mode and running the system file checker. Post back if F8 does not work or you cannot get into safe mode.
To clear the error manually push the UP, DOWN and PUMP buttons simultaneously, ensure the display clears before showing the temperature or error code again. If the display does not clear the reset was not executed correctly.
Error code 0xc0000017 stands for STATUS_NO_MEMORY – There are not enough virtual memory or swap file quotas for the specified operation. This error occurs if Windows 10 (or Windows 8.1) is rebooting after installing an update. A blue screen appears with the following message: Your PC/Device needs to be repaired.
2️⃣ Check for printer updates

Select “Check for Updates.” If any updates are available, the printer will prompt you to install them. Follow the on-screen instructions. If the updates fix the problem, the printer will notify you and you will no longer receive the hp printer error code 0x83c0000a.

The title, ink system failure, or printhead error code 0xc19a0003 means that the problem associated with the ink cartridge. Consequently, there are two instances either ink cartridge not providing ink well or, it may be confused by the printer.
What is 0xc000000d? Error 0xc000000d refers to a blue screen error that displays the error code 0xc000000d with an error message saying Your PC/Device needs to be repaired. When the Boot Configuration Data file is missing or corrupt, you could receive the blue screen error 0xc000000d.
I`d recommend starting by removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet.
Error code 0xC0000064 means the user name does not exist.
But the error code 0xc00000e is a specific BOSD error, which indicates that an important hardware device wasn`t detected by Windows 10. This could be some problems with an SSD or the hard drive where system files are usually stored.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
0x00000002 – Printer Connectivity Error

The error 0x00000002 means that the driver of this printer installed on the computer is corrupted. First of all, you should try to remove this driver from the driver store (if you get an error 0x00000057).

The only permanent solution to the 0x0000011B error is to install the latest Windows Update which fixes the issue. For now, you can try uninstalling the update or disabling the problematic security feature from the Registry. Other workarounds include installing the printer manually.
The only permanent solution to the 0x0000011B error is to install the latest Windows Update which fixes the issue. For now, you can try uninstalling the update or disabling the problematic security feature from the Registry. Other workarounds include installing the printer manually.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

HP LaserJet 6

error code
ANSWER : what is response

Read Full Q/A … :

HP LaserJet 6

Dreaded 6000 Error Code
ANSWER : Did you read this forum thread? http://www.fixyourownprinter.com/posts/71048

Read Full Q/A … :

HP LaserJet 6

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

HP LaserJet 6

Error code sc27-04
ANSWER : Sorry the code is sc27-04

Read Full Q/A … :

HP LaserJet 6

Error message pump motor stalled
ANSWER : Hy,

Read Full Q/A … :

HP LaserJet 6

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :

HP LaserJet 6

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :

HP LaserJet 6