HP Photosmart C7280

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.
Check the USB cable for damage and recommended length, and then restart your printer and computer. Turn off the printer and the computer. Disconnect the USB cable from the computer and printer, and then inspect the cable. If the cable is damaged or longer than 3 m (9 ft 10 in), replace it.
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
Reasons why your HP printer has ink but won`t print

This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.

Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.
A Printer Failure. There is a problem with the printer or ink system. Turn printer off, then on. If problem persists, contact HP. error message displays on the printer control panel, and the printer does not print.
Turning the power ON/OFF while the print monitor screen is displayed may cause the printer driver to go off-line and make printing impossible. In this case, open the [Printers / Printers and Faxes / Devices and Printers] folder on the computer and check if your printer driver is shown as off-line.
A component found in electrostatic printers, laser printers, and xerographic printers and photocopiers. The fuser unit is used to permanently bond toner to a substrate by applying heat and pressure. A fuser unit is made up of two rollers; one to apply heat and one to apply pressure.
The fuse protects your printer from short circuits and power overload. It is placed between the power outlet and the switch on the left side of the printer. If your machine does not start after pressing the power switch, at first you should check if the power cable is connected to a power source.
1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”
Restart your computer, and then immediately press the F11 key repeatedly. Click Start . Press and hold the Shift key, click Power, and then select Restart while holding the Shift key. Continue holding the Shift key while the computer restarts.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
If you are using Windows 10, Windows 8.1, or Windows 8, select Control Panel -> Hardware and Sound -> Devices and Printers. If you are using Windows 7, from the Start menu, select Devices and Printers. If you are using Windows Vista, select the Control Panel -> Hardware and Sound -> Printers.
Same as any software, you need to update printer firmware sometimes to improve your printer functionality. Usually, such updates are performed automatically. They may contain some bug fixes, which makes your device work better, safer, and more efficiently.
Yes, you can usually set up a printer without the disc, provided you have the printer`s USB cable. Also, you may need to download software from the internet for older printers. The instructions for doing this are set out in the steps above.
Can I use HP Instant Ink without a subscription? No. HP Instant Ink is a subscription service. We have plans to match any level of printing needs, starting at $0.99 a month.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
If your computer doesn`t automatically detect the new hardware, open the “Control Panel” and then select “Printers and Hardware.” Click on the “Add Printer” option and allow your computer to detect and install the new printer.
The most common reason is an unreliable connection between the printer and the computer. You might also have a paper jam, out-of-date drivers or a print spooler service with bad data.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Photosmart 8250 ink system failure problem??
ANSWER : To anyone looking for the firmware file

Read Full Q/A … :

HP Photosmart C7280

help with hp photosmart 7760
ANSWER : MIne is doing the same thing tonight!!

Read Full Q/A … :

HP Photosmart C7280

HP Photosmart C6180 Ink System Failure
ANSWER : This has been a life saver for us. Thank you very much for your help.

Read Full Q/A … :

HP Photosmart C7280

printer pulling sheets back in
ANSWER : That is strange. Only thing I can surmise is that since the A5 is a smaller size, maybe the printer thinks it is supposed to be printing on A4 and that’s why it tries to continue to print. Maybe a setting off in your software?

Read Full Q/A … :

HP Photosmart C7280

HP Photosmart 8750 intermittent serv. stat. stuck
ANSWER : I had this error after the printer sat idle for many months. I thought it was the cartridge drive belt stretching, because it was extremely loose and wouldn’t move the carriage due to slippage. Then I noticed there was a gear belt tensioner to the right side that had some movement. Sure enough, when I shined a flashlight into the ink reservoir, there was a spring that had fallen down inside. Looking at the plastic belt tensioner, it looks as if the spring was held on by a plastic post that had broken off. This is most likely the cause of many of these errors, because the plastic break is very clean and not readily visible, (a design flaw in my opinion). Rather than trying to replace the part, I am going to try tapping a hole in the plastic and inserting a machine screw that can hold the tension spring in place. It also looks like the metal notch for the right hand loop of the spring, would not prevent the spring from slipping off at some point, so using a metal file to enlarge the notch may be necessary. If you’re lucky, your spring may have just popped off and is inside the ink reservoir. This may be one reason why the printer was discontinued so soon. One lousy five dollar part makes the whole printer worthless… I use this this printer primarily because it is easy to clean the heads by removing the carts, instead of having to disassemble the whole damn thing, as in ink tank designs. It makes beautiful 13×19 prints with better color accuracy than my Vivera 6 ink printer.

Read Full Q/A … :

HP Photosmart C7280

Color LaserJet 2500 new drum doesn't work.
ANSWER : The drums have a chip on them and it should have reset when you installed it. If not, then read this thread.

Read Full Q/A … :

HP Photosmart C7280

PGBK cartridge not working
ANSWER : Did you try removing the print heads and flushing them under hot tap water?

Read Full Q/A … :

HP Photosmart C7280

Ink Problem
ANSWER : Remove the color cartridge and do a “blot” test by pushing the heads on the bottom onto a paper towel. You should see all the colors. If not, then run hot tap water on the heads. Could be a bad ink cartridge if it still doesn’t work.

Read Full Q/A … :

HP Photosmart C7280