Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check the Margin settings under File>Page Setup to make sure that the right margin is OK. Also check the paragraph format to make sure that you do not have a negative right indent which could be causing the text to extend into an area that is unprintable by your printer.
The problem may be due to a simple issue like printer paper quality or ink/toner cartridge wear, or it could be a more serious problem that requires professional repair.
This happens when the rollers or the transfer belt inside the printer get dirty or covered in excess dirt, ink or toner powder, and as the paper is moved through the printer the `tracks` are being left on the page. This is normally the case when the tracks on the page are located at either end.
Windows. Open the Print Dialog box. In most programs, you will click File and then click Print, or press CTRL+P on your keyboard. In the settings section, change Print on Both Sides to Print One Sided or uncheck Print on both sides depending on your print selection.
If the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only when necessary. Make sure that the power is turned on and remove any paper from the rear tray.
HP printers not printing double-sided or duplex is a very common issue which could be due to several reasons, such as misconfigured printer settings, failed print jobs in queue, outdated drivers or a random glitch.
If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Make sure the paper type setting matches the type of paper you loaded.
There is actually a right and wrong direction to put paper in a device. It`s true! So, the next time you fill your copier trays, check the packaging for an arrow showing which side is the recommended side to copy. If the packaging does not have any arrows, you can determine the copy side yourself.
Dots are typically caused by foreign material inside the machine (for example, paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages.
The duplex copy (1-sided to 2-sided) feature allows you to make a double-sided copy of two single-sided documents. STEP I: First, check the copy type that is suitable to your documents.
If your duplex (double-sided / two-sided) prints are printing upside-down (or `short-edge` when you`re expecting `long-edge`), then you will need to set the `Duplex (long-edge) back-sheet treatment` under Edit printer to `Rotate`. Duplex dropdown option set to rotate within a printer`s settings.
1. or feed roller : a roll or one of two or more rolls by which material is drawn or fed into a machine. 2. : one of a set of small rubber rolls under the platen of a typewriter that help to roll the paper and hold it in place during typing.
A paper feed issue can occur for several reasons, such as dusty or contaminated paper rollers, the condition of the paper in the tray, or even issues with the software. To resolve the issue, try each solution in this document, and then use the steps in this section to print a self-test report.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
When it isn`t working properly, the quality of your prints can suffer. Signs of a bad transfer roller include streaking, squealing, jamming and odors emanating from the printer. Troubleshoot your transfer rollers to restore your prints to their normal high quality.
The message “2-sided Disabled” indicates the duplex tray is not installed correctly into the machine or the back cover of the machine is not closed completely.
What is auto duplex printing? Auto duplex printing simply means that your printer can automatically print on both sides of your paper. Many newer printers feature this function. Some older models, however, require you to manually flip the pages so they can be printed on both sides.
To put it simply, rollers are available in three material classifications. 1) Urethane/Rubber, 2) Metallic, and 3) Resin.
These paint streaks are called raised edge roller marks, and they`re caused by paint that`s been applied too thickly or unevenly. The cause: This typically happens when the roller is full of paint and is pressed too firmly against the wall.
Fortunately, you can remove roller marks by using a wet sponge and some sandpaper. Once your paint has dried off, rub down the surface using your sandpaper. Be sure not to get rid of too much of the paint because the only goal is to even out the coating.
Start > Devices and Printers > Right click your printer > Printer Properties > Preferences > Page Setup and change the Orientation.
Typically, only large digital press printers using rolls of paper can print right to the edge. Most MFPs are not actually capable of printing to the edge of the page since the machinery requires a small amount of space to help feed the paper through the paper path.
An inkjet printer printing lines or missing lines on printouts are caused when the printer cartridges or the cartridge carriage which contains the print head becomes dirty or damaged.
Using both hands, put one piece of paper in the manual feed slot until the front edge of the paper touches the paper feed roller. Once the machine has grasped the paper, let go. The side to be printed should be faced up. The machine will hold the paper in place until the print data is sent to the machine.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :
Unknown Printer

when click on Charms top right side of screen can't print
ANSWER : You picked a good user name. After reading your post, that’s what I am.

Read Full Q/A … :
Unknown Printer

paper will not load right, only on the left side then jams. Worked fine this am, 2 hours later this happens
ANSWER : There is something in the paper path on the right side blocking it. Could be a torn scrap of paper, a dead bug, etc. Use a piece of file folder to push it out.

Read Full Q/A … :
Unknown Printer

sheets feeding or printing slightly crooked
ANSWER : Actually it’s a model 5040, but it appears identical to the photo at right.

Read Full Q/A … :
Unknown Printer

Left side light printing
ANSWER : A possibility could be the Charge Transfer Roller mount on the left side broke and it’s not lifting up to push the paper up to the cartridge drum. Take the cartridge out and push down on each end and see if they respond in the same way.

Read Full Q/A … :
Unknown Printer

Paper feeds straight through without printing on an Epson R2400
ANSWER : I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.

Read Full Q/A … :
Unknown Printer

Phaser Jams every time code: 0,006.74
ANSWER : http://www.support.xerox.com/support/phaser-8560mfp/support/enus.html

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer