Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

  1. Press the [ ] or [ /Menu] key to select a color, and then press the [#Enter] key.
  2. To clean all the print heads, select [All Heads].
  3. To clean the print head for cyan and black, select [Head 1].
  4. To clean the print head for yellow and magenta, select [Head 2].
Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.
Most printers should have a similar set of options. Others have cleaning features under a Tools or More Options tab. Select a cleaning option, such as Clean Heads or Clean Cartridges. If asked which printheads to unclog, select All Colors if this option is available.
Otherwise use a printer head cleaning solution recipe of 50% water and 50% rubbing alcohol. We also like a homemade printhead cleaning solution that is 8-parts Windex to 2-parts rubbing alcohol. This printer head cleaning fluid works like a charm and it`s cheap to make!
Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

Wipe the rubber part of the roller with a soft damp cloth. After that, wipe it with a dry cloth to remove the moisture. Do not use chemical cleaner or organic solvent such as thinner or benzene. Move the printer back to its original position.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Soak the Printhead

Fill a bowl with warm water (or a mixture of water and vinegar to clean the printhead) and place the printhead directly in it. Let it sit for five minutes or so. Pull the printhead out of the water and use a lint-free cloth or paper towel to remove the dried ink.

Run a nozzle check to confirm that the print head is clean. You may need to clean the print head up to 4 times. You can also turn off your Epson printer and wait at least 6 hours. Then try printing again.
Clean the printhead nozzles.

Dampen a microfiber cloth with distilled water. Be sure to use distilled water to prevent any residue from being left behind. Avoid using a paper towel that could leave lint on your printhead. Carefully clean your printhead with the wet cloth to remove dried ink.

The product prints a nozzle check pattern. Check the printed pattern to see if there are gaps in the lines. If there are no gaps, the print head is clean and you can continue printing. If there are gaps or the pattern is faint, clean the print head.
Reset Button Models

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How to reset page counter on Xerox Phaser 3160N
ANSWER : http://apexmic.info/how-to-reset-chip-xerox-phaser-3160.html

Read Full Q/A … :
Unknown Printer

error message that says " remove shipping lock from black cartridge" even though it has been removed
ANSWER : http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01760760

Read Full Q/A … :
Unknown Printer

Won't print after cleaning the printhead
ANSWER : Not a good idea to take the printhead out. You can clean it just as good with it in place. Time to buy a new printer.

Read Full Q/A … :
Unknown Printer

How to remove printhead
ANSWER : That printer looks like it has a printhead that you need to disassemble the printer to remove. I’ve never seen a Canon printer that didn’t have a release lever.

Read Full Q/A … :
Unknown Printer

Xerox Phaser 3250 solid red light with no apparent reason
ANSWER : I found the problem to be a fuser. For $150 you can fix this issue. Cheaper to buy a new unit.

Read Full Q/A … :
Unknown Printer

Xerox Phaser 7750 – FUSER delima
ANSWER : Thanks! On my printer, one of the magnets did dislodge and was stuck on the other side. I finally figured out what it was from your advice. The magnet was not broken and popped right back in to place. Keeping my fingers crossed that was the only issue.

Read Full Q/A … :
Unknown Printer

Phaser Jams every time code: 0,006.74
ANSWER : http://www.support.xerox.com/support/phaser-8560mfp/support/enus.html

Read Full Q/A … :
Unknown Printer

xerox phaser 6100
ANSWER : This post is from nearly a decade ago, so don’t know if the thread is still active. I have this printer in my rural WV classroom and am searching for a fuser unit for the Phaser 6100. Anybody know where I can still purchase one ?

Read Full Q/A … :
Unknown Printer