Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Fault Code 016-790: Maximum Number of Fragments Exceeded on Scan to Email.
Fault Code 016-799: Print Instruction Failure, An Invalid Print Parameter is Included. Repeat the operation, run the job again. Update the Printer Software (Firmware). Power Off the Printer, Wait 10 Seconds, Then Power On the Printer.
016-749 means that the printing language (PDL) that the job was sent in is not supported by the printer. This almost certainly means that you don`t have the optional PostScript kit enabled on the machine. You can purchase a PostScript enablement kit or install the available PCL6 Windows driver.
Fault Code 016-772 occurs when an error occured attempting to Resolve the SMTP Address on the DNS Server during a Scan to Email Job. Make Sure the DNS Server Settings are Correctly Entered into the Device. Make Sure the SMTP Server Settings are Correectly Configured on the Device.
Fault Code 016-765 occurs when the Email message transfer was refused by the SMTP Server because the SMTP Server Hard Disk is full. NOTE: The Scan to Email Feature is only available on the Copier/Printer model.
Fault Code 016-766 occurs when a file system error has caused the Scan to Email job to fail, possibly cause by the Email exceeding the maximum sending size, or the Mailbox is Full. NOTE: The Scan to Email Feature is only available on the Copier/Printer model.
Printer Job Failure Message. An unsupported file was selected at USB Memory Print.
Fault Code 016-426: No Communications With Remote Services Server. This error is caused by a security certificate not being renewed after it has expired on System Software Levels below 70.31. 81. Upgrade your printer to the latest Software General Release.
016-765 The SMTP server HDD is full. 016-766 The memory capacity allocated by the SMTP server is exceeded. Access the email account, Delete jobs on their server because the machine is receiving communication from their SMTP (email) server that the server disk drive or mailboxes are full.
Try the following: Power the printer off and on using the power button on the Control Panel.
016-759 The number of registered users reached the limit. Perform the steps that follow: 1. Advise the customer additional users can be added to the device with expanded storage options.
The printer has been set so that it does not continue printing when the specified number is reached. To continue printing, consult the system administrator. This error is automatically reset after a lapse of the specified time. Check the “Dell Color Track” setting.
Error Code 016

This error occurs when you are trying to launch a streaming channel but your TV lost its network or Internet connection. Select Set up connection to go your TV`s network settings and follow the on-screen instructions.

Fault Code 016-766 occurs when a file system error has caused the Scan to Email job to fail, possibly cause by the Email exceeding the maximum sending size, or the Mailbox is Full. NOTE: The Scan to Email Feature is only available on the Copier/Printer model.
Fault Code 016-766 occurs when a file system error has caused the Scan to Email job to fail, possibly cause by the Email exceeding the maximum sending size, or the Mailbox is Full. NOTE: The Scan to Email Feature is only available on the Copier/Printer model.
016-759 The number of registered users reached the limit. Perform the steps that follow: 1. Advise the customer additional users can be added to the device with expanded storage options.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Xerox 7760 Wrong paper size error when trying to print to A4
ANSWER : At first you could try to print using the Multifunction/Bypass Tray on the left side of your printer.

Read Full Q/A … :
Unknown Printer

Xerox Phaser 7750 – FUSER delima
ANSWER : Thanks! On my printer, one of the magnets did dislodge and was stuck on the other side. I finally figured out what it was from your advice. The magnet was not broken and popped right back in to place. Keeping my fingers crossed that was the only issue.

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

error code :91,720,00:60960
ANSWER : Xerox 8570 Error Code 91720

Read Full Q/A … :
Unknown Printer

How to reset page counter on Xerox Phaser 3160N
ANSWER : http://apexmic.info/how-to-reset-chip-xerox-phaser-3160.html

Read Full Q/A … :
Unknown Printer

Xerox Phaser 3250 solid red light with no apparent reason
ANSWER : I found the problem to be a fuser. For $150 you can fix this issue. Cheaper to buy a new unit.

Read Full Q/A … :
Unknown Printer

Phaser Jams every time code: 0,006.74
ANSWER : http://www.support.xerox.com/support/phaser-8560mfp/support/enus.html

Read Full Q/A … :
Unknown Printer

xerox phaser 6100
ANSWER : This post is from nearly a decade ago, so don’t know if the thread is still active. I have this printer in my rural WV classroom and am searching for a fuser unit for the Phaser 6100. Anybody know where I can still purchase one ?

Read Full Q/A … :
Unknown Printer