Best way to clean the print heads is under hot running water. Otherwise, you are using wet ink to clean dry ink.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
BK ink is intended for photographs, it`s richer. The printer defaults to PGBK for text, lines etc – unless it thinks they are part of a photo. So, you can force a Canon printer to use BK ink instead of PGBK by telling it that you are printing a photo onto plain paper.
Check you have the latest drivers installed for your printer, try uninstalling and reinstalling your printer drivers or try changing the driver settings (adjusting the paper settings has been known to solve the problem). Fully Reconfigure the Printer – If all else fails, you can try entirely reconfiguring your printer.
Even if your cartridge is full and ready for action, it may have become slightly dislodged and no longer in full electrical contact with the printer. The easiest way to rectify this potential problem is to simply remove and reinstall the cartridges.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
If you print in mostly black, your black cartridge will naturally run out faster than the color cartridges. However, some printers will pull a bit of ink from the color cartridges when you are printing solely in black, just to keep them primed for future use.
Ink cartridges can dry out over time. If they are sitting in your machine for an extended period, they will eventually dry up and become unusable. The simplest way to combat this problem is by printing more frequently or running regular cleans and ink tests to ensure the nozzles remain clean.
Clogs. Inkjet printers can develop clogged cartridges that cause defects in their output, including voids within lines of text. These problems often show up after your hardware sits idle for periods of time, which can cause ink to dry out.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
In four-color press printing, black is achieved by mixing cyan, magenta and yellow and then adding black ink on top of that. The result is a rich, deep black color. If you don`t have your image colors set correctly, though, the black can appear gray or washed out.
On the Main tab, select Manual for Color/Intensity, and click Set…. The Manual Color Adjustment dialog box opens. Select Light, Normal, or Dark for Brightness, and click OK.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Page Black and Black Used for regular document printing, the page black ink cartridge (PGBK) has twice the capacity of photo black (BK).
(PaGe BlacK or PiGmented BlacK) The black ink in Canon inkjet printers used for regular printed documents. The PGBK pigmented ink does not adhere well to coated stock. In contrast, the BK cartridge is used for photos.
Black Print Mode allows you to print only with black ink as a temporary emergency measure to minimise the down time in the event any colour inks are expended, even if there is no replacement cartridges available.
Many customers wonder if they need to have all the cartridges installed to print. The answer is YES. If one of the cartridges is missing from your printer it will not operate.
No. All cartridges must be installed.
If using the color cartridge, colors print normally but black prints lighter than usual. You can continue to print until print quality becomes unacceptable.
To underprint, or print white on black paper, you simply swap the traditional position of the white toner cartridge in the printer with the cyan cartridge by moving it to the last slot. There`s no flushing the lines or any of that – you literally just pick up the first and last cartridges and move their positions.
The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long. Why? Because running on an empty cartridge for too long can cause your printhead to overheat resulting in irreversible printer damage.
A low ink/toner density setting
Your default setting could be set to low, causing you to get those faint prints. If your printer does have ink/toner density settings, you should be able to find them once you`ve clicked on your printer in `Devices & Printers.
Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use. If you regularly go a few weeks without printing, your cartridges will eventually dry out and need to be replaced.