Paper problem with HP PSC 1410

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.

Check the paper rollers and clean any particles of dust or dirt if you continue getting error messages indicating there is no paper in the printer. Make sure the stack of papers isn`t crumpled or bowed. Remove the stack of papers and replace the tray. Replace the paper and take it out again.

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.

For HP Laser printers, click the Paper tab, click the Original Size drop-down, and then make sure the paper size matches the type of paper loaded into the printer. Click the Output Size drop-down, select Same as Original Size, and then click OK.

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.

Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.

just GOTO settings > printer properties of your printer > preferences>paper quality >change the paper to A4 size . and restart the printer.