HP LaserJet 6L

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Check the paper rollers and clean any particles of dust or dirt if you continue getting error messages indicating there is no paper in the printer. Make sure the stack of papers isn`t crumpled or bowed. Remove the stack of papers and replace the tray. Replace the paper and take it out again.
Solution one: Perform a power reset

With the printer turned on, disconnect the power cord from the rear of the printer. Unplug the power cord from the wall outlet. Wait at least 30 seconds. Plug the power cord back into the wall outlet.

A “Load Paper” intervention message appears on the printer display even when there is paper loaded in the tray. This error message means the printer is not detecting any paper on the tray. The same intervention message will appear when: The tray is empty.
Streaking is usually caused by a worn out drum unit or spent toner cartridge. Drum units are a consumable and only need to be replaced after the use of 3 or 4 toners. Not all printers use a separate toner and drum unit.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
This error can occur if the printer trays are installed incorrectly. Make sure the printer is located on a flat surface, and then make sure the photo tray moves smoothly within the paper tray guides. Make sure the printer is positioned on a flat surface. Push in the output tray extender.
Empty ink or toner cartridges that need replacing. Ink or toner cartridges that have become dislodged from their proper place. The wrong paper size loaded in the input tray. Clogged printer head nozzles causing a build-up of blocked ink or toner.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP LaserJet 6L

Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.

Read Full Q/A … :

HP LaserJet 6L

Error Message "Paper out" when paper loaded
ANSWER : Check your paper tray settings as printer may be looking for paper from the manual feed tray on top of printer.

Read Full Q/A … :

HP LaserJet 6L

Error message to load paper and push OK, but not out of paper
ANSWER : Getting started with binary choices, and following a specific time, points transpired due to the procedures which Used to do not. And when I consequently found out what the thing is my accident, I found this web site http://options24.net which many techniques and choose the best for yourself. I think everyone up against this type of problem, thanks for your attention.

Read Full Q/A … :

HP LaserJet 6L

Canon mx410 Paper jam message, but no paper jam?!
ANSWER : I have exactly the same problem, no answers 😳

Read Full Q/A … :

HP LaserJet 6L

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :

HP LaserJet 6L

Paper Jam Messages
ANSWER : You would need to replace the pickup roller. It’s not too difficult to do. http://www.precisionroller.com/paper-feed-components-for-hp-laserjet-2430/details_36378.html

Read Full Q/A … :

HP LaserJet 6L

paper drive wont accept paper
ANSWER : There is probably a small scrap of paper stuck at the left edge of the paper path. The paper hits it and skews to the left. The smaller size bypasses it. You need to shove something stiff, like a piece of file folder, down the paper path and attempt to dislodge it.

Read Full Q/A … :

HP LaserJet 6L