Epson WorkForce WP-4530
Paper jams only on duplexing; not in the removable duplexer but inside the machine.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Remove all printer paper from the tray and try reloading
One of the most common causes of paper jams is that the paper has simply not been loaded correctly into the printer paper feed. With this in mind, remove any paper from the tray in order to check for any jams.
Improperly Loading Paper into the Device
Loading paper that is stuck together, frayed, curled or bent can cause a jam. Overloading the paper tray, loading different thicknesses of paper in the tray or using paper that isn`t appropriate for your particular printer can all result in a jammed printer.
More often than not, repeated “paper jams” are a false alarm caused by accumulated dirt or ink on the image sensor that cause the scanner to stop. Simply cleaning the scanner can solve this problem.
A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject.
Document Jam means the document in the automatic document feeder (ADF) was loaded or fed improperly or was too long. The error message may be followed by Clear the scanner jam.
Turn the printer on at least once every two weeks to automatically clean the print head and prevent the nozzles from clogging. If you do not turn on the printer for a long time, the printer may malfunction.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
And the first 2 sheets, the full and half sheet that go through first, are blank.
Paper Jam error but no paper jam
Obviously you didn’t get all the paper cleared out. There is a small scrap in the paper path causing the jam when the paper hits it. You can try clearing it out by inserting something stiff like a piece of file folder from the back of the printer into the paper path and pushing the offending piece out that way.
Paper Jam and carriage jam code when nothing is jammed
Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.
Canon mx410 Paper jam message, but no paper jam?!
I have exactly the same problem, no answers 😳
hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.
Keep getting a paper jam message. There is no jam.
You can quit wondering. Parts are unavailable. I’ve seen posts where people have 3D printed the parts or machined them out of metal.
Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.
message error: ADF paper jam
There is a thin plastic arm that the paper pushes on. It is spring loaded. If it doesn’t return and unblock the sensor after the paper passes it, you get the paper jam warning. I’m guessing that is the spring you are referring to.