Konica-Minolta MagiColor 1680MF
Experienced technical support provide their insights in answering this question :
I have also this problem. I just bought a new color printer. Installing was fine, and had printed one page of a print test on the first setup, but when it started to print the second page, the paper jams. I am a tutor at DissertationHelp.uk and I also want to solution in this problem.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Overloading the paper tray, not properly setting the alignment guides, loading paper skewed, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer can all result in a jammed printer.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
CMYK and RGB are acronyms that refer to color models used to create images and files. CMYK color mode is used for printing. The RGB color mode is used to display images that are intended to be viewed on computer monitors and screens only.
Updated: 02/07/2022 by Computer Hope. A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject. When this occurs, the printer does not function properly until the paper is manually removed.
User Counter: Resetting Users` Counters
Press [User Auth./Account Track] on the [Administrator Setting Menu] screen, and then press [User Authentication Setting] and [User Counter] in sequence. The [User Counter] screen is displayed. Reset counters for authenticated users and public users individually.
User Counter: Resetting Users` Counters
Press [User Auth./Account Track] on the [Administrator Setting Menu] screen, and then press [User Authentication Setting] and [User Counter] in sequence. The [User Counter] screen is displayed. Reset counters for authenticated users and public users individually.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
Konica-Minolta MagiColor 1680MF
hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.
Read Full Q/A … :
Konica-Minolta MagiColor 1680MF
Paper Jam when printing color.
ANSWER : I have also this problem. I just bought a new color printer. Installing was fine, and had printed one page of a print test on the first setup, but when it started to print the second page, the paper jams. I am a tutor at DissertationHelp.uk and I also want to solution in this problem.
Read Full Q/A … :
Konica-Minolta MagiColor 1680MF
My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.
Read Full Q/A … :
Konica-Minolta MagiColor 1680MF
Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.
Read Full Q/A … :
Konica-Minolta MagiColor 1680MF
Paper Jam error but no paper jam
ANSWER : Obviously you didn’t get all the paper cleared out. There is a small scrap in the paper path causing the jam when the paper hits it. You can try clearing it out by inserting something stiff like a piece of file folder from the back of the printer into the paper path and pushing the offending piece out that way.
Read Full Q/A … :
Konica-Minolta MagiColor 1680MF
Canon mx410 Paper jam message, but no paper jam?!
ANSWER : I have exactly the same problem, no answers 😳
Read Full Q/A … :
Konica-Minolta MagiColor 1680MF
Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.
Read Full Q/A … :
Konica-Minolta MagiColor 1680MF