HP OfficeJet 6210XI
Paper feeds 1/2″ too much at top of page. Adjustable?
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Sheet feeder: Holds the blank paper and automatically feeds the paper during printing.
A paper feed issue can occur for several reasons, such as dusty or contaminated paper rollers, the condition of the paper in the tray, or even issues with the software.
Paper is housed in the printer`s paper tray, and most trays can be found along the bottom of the printer. There is usually a small notch on the face of the tray that pulls out so you can insert the paper.
Typically, the top of the paper comes out first and face up. This means if you are standing in front of the printer looking down at tray where the paper comes out, you should see your printed page, but it will be upside down.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
The manual feed slot is located on the front of your printer. It can be closed when not in use, making the product more compact. Use the manual feed slot to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper tray.
If you find that your paper jams happen on only one side of the printer, there could be an issue with the paper feed. Often, something is blocking the path of the paper as it is fed through the rollers, such as a torn piece of paper.
The printer automatically adjusts itself for the type of paper you select in your print settings. That is why the paper type setting is so important. It tells your printer what kind of paper you are using and adjusts the ink coverage accordingly.
Usually old style dot-matrix printers, or line printers.
Click the Style menu, and then select Envelopes. Click Layout, and then select your envelope size from the Layout pop up menu. To add, remove, or change the return address field, click Label, and then select or deselect the check box next to Print my address. Click Orientation, and then select the landscape option.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
And the first 2 sheets, the full and half sheet that go through first, are blank.
Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.
Brother Hl-2040 paper over feed
Your instructions saved me..I had the board off 3 times before i saw your pix….thanks so much!
Judging by your other post, you must have read that you need to remove the laser scanner assy and lubricate the spinning mirror shaft. Good luck.
Paper Feed Problem on HP R80
In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.
paper drive wont accept paper
There is probably a small scrap of paper stuck at the left edge of the paper path. The paper hits it and skews to the left. The smaller size bypasses it. You need to shove something stiff, like a piece of file folder, down the paper path and attempt to dislodge it.
Error message to load paper and push OK, but not out of paper
I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.
Multiple paper feed
Most likely the pickup roller solenoid is sticking. The way it works is the solenoid energizes, pulling down a metal plate that releases the pickup roller. There is some foam on the base to quiet the clicking sound. The foam deteriorates and the plate sticks to the gooey residue. This allows the pickup roller to continue to turn instead of stopping after one revolution when the plate springs back up. That results in multiple paper being fed. Solution is to find the solenoid, which is at the end of the pickup roller shaft. Remove the sticky foam and preferably replace it with some thin sticky backed felt. You can find it at a hardware store as it is used on the bottom of chair legs.