Canon ImageRunner 400
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Open the power switch cover and press the power switch toward ” “. Close the power switch cover. The machine may take some time to completely shut down.
Load the paper in portrait orientation (with the short edge toward the machine) and the print side face up. Paper cannot be loaded in landscape orientation.
Start > Devices and Printers > Right click your printer > Printer Properties > Preferences > Page Setup and change the Orientation.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
The default setting for both the System Manager ID and System PIN is `7654321`. It is recommended that you change both the System Manager ID and System PIN.
Put the side to be printed on face up with the leading edge (top) of the paper in first. To print on the second side, put the paper face down, with the leading edge (top) of the paper in first. If letterhead paper is used, put it in with the heading face down and in first.
For a top load printer, the paper typically moves in somewhat of a straight line through the printer. This means that the side of the paper facing you as the paper goes in is the same side of the paper facing you as it comes back out. In a front load printer, the paper switches direction and flips over during printing.
Load paper short edge first and printable side up. Load letterhead or pre-printed paper top edge first. Do not load paper above the arrow mark inside the edge guide. If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time.
Paper, or sheet, size is the size of the paper used for printing. Orientation refers to the portrait (vertical) or landscape (horizontal) layout.
The difference between leaving your printer on or turning it off is generally insignificant in terms of energy costs. For healthier print heads and more efficient ink consumption, however, it`s better to leave your printer on.
Open the Canon IJ Printer Assistant Tool.
Select Auto Power. Select Disable for Auto Power Off.
Open the Canon IJ Printer Assistant Tool.
Select Auto Power. Select Disable for Auto Power Off.
To power OFF the scanner, close the feed tray. The scanner turns OFF. NOTE: Do not close the feed tray while the document guides are spread open. This can damage the scanner and result in malfunction.
To restart the machine, it is necessary to log in as an administrator. 1. Click [Settings/Registration] → [Restart Device] → [Perform Restart].
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
Canon ImageRunner 400
Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.
Read Full Q/A … :
Canon ImageRunner 400
Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.
Read Full Q/A … :
Canon ImageRunner 400
Error Message "Paper out" when paper loaded
ANSWER : Check your paper tray settings as printer may be looking for paper from the manual feed tray on top of printer.
Read Full Q/A … :
Canon ImageRunner 400
ERROR On New Canon iR Advance C2030
ANSWER : Error E020-060 was solved by changing the new memory chip with an old one. It worked very well.
Read Full Q/A … :
Canon ImageRunner 400
paper drive wont accept paper
ANSWER : There is probably a small scrap of paper stuck at the left edge of the paper path. The paper hits it and skews to the left. The smaller size bypasses it. You need to shove something stiff, like a piece of file folder, down the paper path and attempt to dislodge it.
Read Full Q/A … :
Canon ImageRunner 400
when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Read Full Q/A … :
Canon ImageRunner 400
Paper jam in front of print head. HELP URGENT Please
ANSWER : I am 99% sure you don’t have a problem with a sensor. Having no idea what you do in the cleaning process, and not being able to look at the printer, there is no way to help or advise you.
Read Full Q/A … :
Canon ImageRunner 400