Lexmark Optra R

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the selected option isn`t “plain paper”, then the printer may stop printing duplex. Simply changing this option back to “plain paper” will allow the printer to print on both sides of the paper.
1200 dpi 4800 CQ Specify the printed output resolution in dots per inch or in color quality (CQ). Note: 4800 CQ is the factory default setting.
Open the tray and do one or more of the following: Check for paper jams or misfeeds. Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. If you are printing on custom‑size paper, then make sure that the paper guides rest against the edges of the paper.
A double-engine duplexer means that both sides of the media are printed simultaneously. With this method, a conductor belt generates a picture of both sides of the print job using the data retrieved from your PC.
These duplex printing is not working problems can be fixed by reinstalling applications, resetting settings and preferences. Sometimes some OS files, as well as drivers, can get out of date and trigger issues with performance or program procedures.
specialise in providing your business with a two sided thermal print solution. Our innovative solutions are designed to improve operational efficiency, reduce waste, lower costs and enhance the customer`s experience of your brand.
Print Quality: A 1200 DPI printer can produce more detailed and sharper prints than a 600 DPI printer because it can place twice as many dots per inch. This increased resolution leads to smoother gradients, finer details, and better overall print quality.
Recommended minimum resolution for printing is 300 dpi; computer monitors generally have a display setting of 72 dpi or 96 dpi.
Improve printer performance by selecting the optimum paper type for the tray. You can select from the following paper types: Tray 1. [Thin Paper], [Thick Paper 1], [Thick Paper 2], [Plain Paper], [Recycled Paper], [Color Paper], [Preprinted], [Prepunched], [Letterhead], [Bond Paper], [Cardstock], [Label Paper]
Open the document, and then click File > Print. Select your printer, and then click Printer Properties, Preferences, or Printer Setup. From the print settings, select the option for a two-sided print job. Menu options vary by printer model.
Enter Control Panel > Devices and Printers. Right click the printer icon, then click Printer Properties. Click the Device Settings tab. Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Open the document, and then click File > Print. Select your printer, and then click Printer Properties, Preferences, or Printer Setup. From the print settings, select the option for a two-sided print job. Menu options vary by printer model.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

Read Full Q/A … :

Lexmark Optra R

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :

Lexmark Optra R

PGBK shows no band on test print;
ANSWER : Take out all the inks. On the right side of the cartridge assy. you will see a plastic lever. Lift it up and reach inside and remove the printhead assy. Take it over to the sink and run hot water into the black screen on top to flush out the dried ink. Then flip it over and run hot water on the print heads. Do it for about a minute for each side and then repeat. Blot it dry with a paper towel. Reinstall and try it again.

Read Full Q/A … :

Lexmark Optra R

can't align print head horizontally despite running program
ANSWER : Don’t call that number, it’s a phishing scam number as far as I can tell. Last thing you want to do is have them remote into your computer (they may try hacking you in the background to try & steal bank info/saved passwords) or give them a CC number for tech help since they are not directly affiliated with Epson. As far as Epson’s site shows there is no toll free tech line, only 2 800s listed on their site and 1 is presales other is for supply orders.

Read Full Q/A … :

Lexmark Optra R

PGBK printing only half a band
ANSWER : You can try flushing the head under hot tap water. Take the print tanks out and flip the plastic release lever to the right of the assy. up. That will release the head. Reach in and pull it out and take it over to the sink. Run the water through the screens and flip it over and run it on the heads. Repeat several times and reinstall.

Read Full Q/A … :

Lexmark Optra R

Magenta bands (wide) on Epson R1800 6×4 prints
ANSWER : These printers are meant to be good for the fashion and it could be more meaningful for the people and they can use it for many purpose. Jack peralta black jacket

Read Full Q/A … :

Lexmark Optra R

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :

Lexmark Optra R

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

Lexmark Optra R