Epson Stylus CX4600
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct. Make sure your document does not contain blank pages. If your printer software has a Preview option, you can check for blank pages before you print and remove them, if necessary.
Ensure that the supported settings are applied in the printer driver and click Print in Black to continue printing using Black Print Mode or Cancel Print to replace the expended cartridge.
If the ink level is sufficient, but the printer still does not print black ink, you may need to run a cleaning cycle. A cleaning cycle is a process that cleans the printer heads and removes any clogged or dried ink.
The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink. After you print, the colors in your printout need time to set as the ink dries.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Check if the cable is properly connected from the computer to your Epson printer. If you are using wifi, check if the devices are connected to the same network. Check for ink levels or paper jams. Flashing ink out light means low ink.
The print head nozzles may be clogged. Perform a nozzle check to see if the print head nozzles are clogged. Perform a nozzle check, and then clean the print head if any of the print head nozzles are clogged.
Check if the cable is properly connected from the computer to your Epson printer. If you are using wifi, check if the devices are connected to the same network. Check for ink levels or paper jams. Flashing ink out light means low ink.
If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Kyocera M6026cdn – Somewhat random white blotches on printed page
ANSWER : Looking at that photo, it’s definitely nothing to do with electronics, high voltage or the laser assembly. I noticed you are using compatibles. I’ve seen a lot of those bad right out of the box.
Read Full Q/A … :
Epson Stylus CX4600
Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.
Read Full Q/A … :
Epson Stylus CX4600
How many pages can I print my compatible Epson Printer Ink cartridge? 1-800-644-5716
ANSWER : What a really bad Google translation. You should get some English speaking person to write up your next scam post.
Read Full Q/A … :
Epson Stylus CX4600
Black line printing in the middle of the page from top to bottom
ANSWER : Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.
Read Full Q/A … :
Epson Stylus CX4600
My printing come out blurred
ANSWER : doris…There are usually 2 reasons for blurry output on this printer. First, make sure that the alignment is correct. You can get to it from the maintenance tab on the software that came with the printer. The other common cause of blurring is debris under the printhead. Hope this helps.
Read Full Q/A … :
Epson Stylus CX4600
HP LaserJet 2200D won't print configuration page
ANSWER : Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:
Read Full Q/A … :
Epson Stylus CX4600
when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Read Full Q/A … :
Epson Stylus CX4600
incomplete printing of page
ANSWER : the printer for above mentioned problem is an Epson; product name = WF-254
Read Full Q/A … :
Epson Stylus CX4600