Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Turn power off at main switch again and wait for 5-6 seconds or until all the lights have gone out on the machine. Now turn the machine back on. Your machine should now be reset and in most cases now be working again.
Bourrage Error comes in the Passbook Printer of Olivetti PR2 Plus. This error may occurs due to the paper jamming in the passbook printer. Clear the Paper Jam and do the calibration to enable the readiness in the status of the printer.
Connect the printer cable to the printer cable port located on the right side of the printer. ALWAYS turn the printer and the computer OFF before connecting the printer cable. Turn the main switch, located on the left side of the printer, OFF (O). Turn the main switch to the printer back ON ( | ).
1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”
Open Settings -> Devices -> Printers and Scanners (or run a quick access URI command: ms-settings:printers ); Select a printer you want to remove and click Remove Device; Confirm the printer removal.
Here`s how. Select the Start button, then select Settings > Devices > Printers & scanners . Select Add a printer or scanner. Wait for your device to find nearby printers, choose the one you want, and then select Add device.
Note: The LAN printer ships with a default IP address of 0.0. 0.0, which automatically enables DHCP and AutoIP within the unit.
If you`ve tried all possible solutions and you still can`t print to your printer, reset the printing system. This process deletes all printers from your list of printers, deletes information about all completed print jobs, and deletes all printer presets.
Just like computers, printers have volatile memory (RAM) that is removed when you turn the printer off. Volatile memory requires power to store the information. Deleting volatile memory is easy: Simply shut down or unplug your printer for a minute or so.
Usually, it should not take more than a few minutes to restore the printer to its factory settings. However, I recommend you to perform the following steps to isolate the issue and arrive at a fix: Disconnect the power cable from the printer while the printer is still ON.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
a misprint or misspelling in a text.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
In Windows, go to Printer Properties > Maintenance > Clean Heads > OK and follow on-screen prompts. On a Mac, check the Applications folder for a Utility application for the printer. To manually clean the printer, remove printheads and use equal parts water and isopropyl alcohol to clean them.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Remove and Re-Add Your Printer in Windows

If this happens, go to Settings > Devices > Printers & Scanners, select your printer, and remove it. Then click Add a Printer or Scanner to re-add it to the device list.

Printers used to output documents from a computer do not require online access to operate. Provided the document or file to be printed is stored on a local hard disk drive or on the local network, it can be printed without a connection to the Internet.
To access the network configuration menu, select the icon. Then select Wireless and networks to enable/disable and set the Mobile, Wi-Fi and Bluetooth network operating parameters. If this mode is enabled, all wireless connections are disabled.
Every printer contains an IP address that allows it to seamlessly connect to your computer (or other devices) through your Wi-Fi network.
For inkjet printer owners, a dormant printer can quickly be a problem if you forgo printing for even a short period of time. Printer cartridges can dry out, the printhead can clog, and inevitably, you have to invest in a new set of pricey replacement cartridges.
For healthier print heads and more efficient ink consumption, however, it`s better to leave your printer on. Constantly switching your printer off and on will decrease your printer`s lifespan, so try to keep the off/on to a minimum.
Network or Shared Printer Troubleshooting

Check if printer or PC is powered off or offline. Check for default printer selected by users on network. Check printer`s configuration and ping its IP address. Change network cable for the printer. Observe indicator lights on the printer network port.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

bourrage error PR-A4
ANSWER : i want to repair printer olivetti

Read Full Q/A … :
Unknown Printer

HP Laserjet 4 Plus LED display dim
ANSWER : My HP Laserjet Plus’s LED display went blank around 6 weeks ago. It had been acting strangely for about a month, when ready, instead of the usual 00 READY it would display 000READY, which got my attention. Well, it suddenly went entirely AWOL. The service manual said to check:

Read Full Q/A … :
Unknown Printer

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :
Unknown Printer

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :
Unknown Printer

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :
Unknown Printer

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :
Unknown Printer

Scanner error keeps coming up
ANSWER : I am having the same problem with my Epson Workforce 645

Read Full Q/A … :
Unknown Printer