Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

This error indicates that a sensor error has occurred in the image drum. If the error is not resolved after the toner cartridge and the image drum are reset according to the guidance on the device`s Operator panel, this may be because the belt unit is not properly installed so that the image drum moves upward.
543 Toner Sensor Error after installing a new or replacement print cartridge into the printer. Check the print cartridge for the following problem before checking any other possible causes. Confirm that all shipping restraints have been removed from the print cartridge.
This error may occur since the image drum are not installed properly if the blue knobs are not locked. The error number 540 indicates a sensor error for the yellow image drum and 541 for the magenta image drum. 6. Place all image drums back into the device.
Turn off the printer and remove the toner cartridge. Look inside the printer in the area below where the cartridge goes. The toner sensor is on the right-hand side.
SMTP error 541 occurs when the recipient`s email server rejects the specific email. It may be due to various reasons such as: Email message resembles spam. Poor IP address reputation.
Error: 544, 545, 546, 547. A color toner cartridge indicated on the screen is not installed. Make sure that the lever on the toner cartridge is fully turned and the protective tape is removed.
ANSWER. This error indicates that the toner cartridge is not installed or not properly installed.
Error: 550, 554, 614, 620. The installed Y (Yellow) toner cartridge is not optimum. We recommend using an optimum toner cartridge.
1 Press and release the SEL key to take the printer off-line. The SEL light will be out. 2 Then, press and hold the SHIFT key and press the RESET (CHARACTER PITCH) key. 3 The printer is reset.
The toner patch sensor inside the printer measures the reflectivity of the patches to determine the optimum operating point for each toner color. This determination is based on the readings from the toner patch sensor, and one operating point for a developer bias and laser power is chosen.
On your computer, in the Windows Notification Area (bottom-right corner of your Windows desktop), right-click the printer icon. In the printer menu, select the Properties or Preferences option. In the printer settings window, the ink or toner levels are displayed for the currently-installed cartridge(s).
ERROR: 541 5.4.

Most commonly the SMTP 541 error indicates that a spam filter at the recipient end classified the mail as spam. Let discuss the possible reasons behind this behavior: Message resembling spam. Spamming in the server.

Error 514 indicates that there is a communication fault between the energy meter and inverter.
Check that the same IP address is set for the machine and the machine`s port setting on the computer. Check that the IP address is not duplicated by another device. Check that the correct IP address, subnet mask, and gateway address are set. If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
(Error: 544, 545, 546, 547)” appears, please check the following items. This error shows that the toner cartridge of the indicated color is not properly installed. 1. Check that the blue lever (2) of the toner cartridge (1) is rotated to the interior side.
04: Runaway of the Port CPU due to noise etc.
ANSWER. This error occurs when this machine cannot read the information of consumables and maintenance products.
This error indicates that the position of the image drum cannot be detected.
ANSWER. This error is displayed when a timeout occurs while the device is receiving the print data over the network. There is a menu called [Timeout Injob] on the device. This menu sets the waiting time (sec) of the device, from when the received data process is stopped until the page is output.
Error 614 can be caused by data corruption during normal processing (for example, an operating system panic occurs, causing interruption in disk writes when using UNIX files for SAP database devices). This may be due to a problem with SAP ASE, the operating system, or hardware.
1 Press and release the SEL key to take the printer off-line. The SEL light will be out. 2 Then, press and hold the SHIFT key and press the RESET (CHARACTER PITCH) key. 3 The printer is reset.
Irving, Texas: OKI Data Americas, a world-class printing technology leader, announced today that effective March 31, 2021, OKI Data Americas, Inc. will no longer distribute printer hardware under the OKI brand to the North, Central and South American markets.
a misprint or misspelling in a text.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

RESET OKIDATA TONER DRUM
ANSWER : HI there, oki image drums contain a fuse. You can reset them if they are working/printing ok by replacing the fuse. Hope this helps. The fuse is located inside the unit so is a bit fiddly.

Read Full Q/A … :
Unknown Printer

RESET OKIDATA TONER DRUM
ANSWER : Hi guys

Read Full Q/A … :
Unknown Printer

Brother toner cartridge low toner override
ANSWER : Thank you. You are a genius. Of course this is not a substitute for cartridge replacement but it is great for extending the life of the color cartridges and allowing you to continue to print until you can get new cartridges.

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

HP 4250, error 54.1 Remove sealing tape from toner
ANSWER : I am having the same problem as everyone else can someone send me a new link or the pdf

Read Full Q/A … :
Unknown Printer

reset toners and image drum life
ANSWER : They both have chips that need to be replaced. There are videos on YouTube that show how to refill the toners and how to replace the chips.

Read Full Q/A … :
Unknown Printer

Density Shutter Error
ANSWER : I’ve never worked on one of those printers, but I have never, ever seen 1 valid solution for printer repair on fixya.com I read the replies there when I need a good laugh. Makes me wonder what the “techs” on that forum actually do for a living. It certainly couldn’t be printer repair.

Read Full Q/A … :
Unknown Printer

Brother toner cartridge low toner override
ANSWER : follow these steps:

Read Full Q/A … :
Unknown Printer