Unknown Printer

Experienced technical support provide their insights in answering this question :
Hi,

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Error: 490, 491, 492, 493, 494. No paper is loaded in the indicated tray.
This error indicates that a sensor error has occurred in the image drum. If the error is not resolved after the toner cartridge and the image drum are reset according to the guidance on the device`s Operator panel, this may be because the belt unit is not properly installed so that the image drum moves upward.
Remove the jammed paper from the output exit. Pull the front cover open lever (blue) to open the front cover. Pull the L2 lever and lift the output tray until it reaches the stop position.
ANSWER. This error occurs when this machine cannot read the information of consumables and maintenance products.
This error indicates that an incompatible toner cartridge or image drum is installed to the device. An error occurs when a toner cartridge or image drum with abnormal information manufactured by a third party is installed. Install a genuine toner cartridge/image drum that is appropriate for the device.
A paper jam has occurred around the front cover. When the error code 401 is displayed, paper may have automatically ejected. In this case, open and close the front cover to clear the error.
Error: 410, 411, 412, 413. The indicated cartridge ran out of toner. Opening and closing the output tray can resume printing for a while, but it may damage the image drum. Replace the toner cartridge with a new one as soon as possible.
Pull the front cover open lever (blue) to open the front cover. Pull out the jammed paper gently. Close the front cover firmly with both hands.
The device prints on the paper of a size different from what is specified for printing. The size of the paper loaded in the tray indicated by the error may be different from that specified for printing.
If the message “[Colour] Toner cartridge not properly installed.” (Error: 544, 545, 546, 547) is displayed, confirm the following items. This error indicates that the toner cartridge of the indicated colour is not properly installed.
If the “Paper jam has occurred. Please open the scanner unit and the output tray to check.” message is displayed, a paper jam has occurred near the fuser unit or the image drum.
The Oki error codes 140, 141 and 142 all relate to the performance of your printers drum. The drum is crucial to the performance of your Oki printer, so you`ll need to resolve the problem before you`re allowed to print again.
For the error code 392, 393 or 394, remove the jammed paper by following the same procedure. If paper jams occur frequently, clean the paper feed roller. Please see “Cleaning the paper feed roller (Tray 1/2/3/4)” for details.
04: Runaway of the Port CPU due to noise etc.
S.C. 070 PostScript Internal Error An error was detected in PostScript core. If an address is displayed in LCD, record it and reboot.
Error 002: your satellite signal is temporarily unavailable.
401 Unauthorized is the status code to return when the client provides no credentials or invalid credentials. 403 Forbidden is the status code to return when a client has valid credentials but not enough privileges to perform an action on a resource.
ANSWER. This error is displayed when a timeout occurs while the device is receiving the print data over the network. There is a menu called [Timeout Injob] on the device. This menu sets the waiting time (sec) of the device, from when the received data process is stopped until the page is output.
This error typically occurs when one of the LED head cables becomes disconnected from the LED head located in the top cover of the machine while the printer is powered on. This will short out the PUCU board and ultimately the PUCU board will need to be replaced to resolve the error.
This error may occur since the image drum are not installed properly if the blue knobs are not locked. The error number 540 indicates a sensor error for the yellow image drum and 541 for the magenta image drum. 6. Place all image drums back into the device.
The error code 004-311 indicates an issue with the optional duplex module. Switch the printer off, reseat the duplexer then switch the printer back on.
The error 0x00000002 means that the driver of this printer installed on the computer is corrupted. First of all, you should try to remove this driver from the driver store (if you get an error 0x00000057).
ANSWER. This error indicates that the toner cartridge is not installed or not properly installed.
A 49 error typically occurs when the printer attempts to perform an action that the firmware is not capable of performing or might not be designed to handle, for example: Printing files that include unsupported printer commands. Interfacing with a third-party solution that was not designed to work with the printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

Oki error codes
ANSWER : Hi,

Read Full Q/A … :
Unknown Printer

Error code 79 on Oki Page 12i/n
ANSWER : Open the lid of the printer and check the two cables on the right side (on the inside of the lid). Make sure both cables are introduced correctly in the plugs. This should resolve the problem. Good luck, Mark

Read Full Q/A … :
Unknown Printer

Dreaded 6000 Error Code
ANSWER : Did you read this forum thread? http://www.fixyourownprinter.com/posts/71048

Read Full Q/A … :
Unknown Printer

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :
Unknown Printer

Error code sc27-04
ANSWER : Sorry the code is sc27-04

Read Full Q/A … :
Unknown Printer

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :
Unknown Printer

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :
Unknown Printer