How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The printing speed of serial dot matrix printers with moving heads varies from 30 to 1550 characters per second (cps).
To illustrate, review this example: Consider a single-pass inkjet printer with 1200dpi 100 kHz of printhead. A simple calculation shows that the theoretical speed this printhead can reach is 127 meters per minute or 1 inch/1200 ×100 kHz = 127 m/min.
PPM stands for Paper per minute which is used to measure the printing speed of both inkjet and laser printers. Most printers include a PPM rating for both black and color documents. These speed measurements are typically listed in the printer`s technical specifications.
The best print speed for everyday prints (medium quality) is about 50–60 mm/s. However, users should note that some materials can be printed very quickly (e.g. PLA) while some require a slower rate to prevent warping or print failure (e.g. TPU).
speed: Given in characters per second (cps),the speed can vary from about 50 to over 500 cps. Most dot-matrix printers offer different speeds depending on the quality of print desired. print quality: Determined by the number of pins (the mechanisms that print the dots), it can vary from 9 to 24.
Pages per minute (PPM) is a printer speed measurement standard. It is the measurement standard for how fast a printer can print a standardized page.
Current graphics sent to printer via Windows Drivers has `AUTO` encoding method. This can be changed in Printer Driver Properties > `Printing Preferences` > `Options` > `Graphic Options` > `Encoding`. User has options to select others like `PCX`, `RLE` or `HEX` Encoding methods.
In general, however, a print speed of 12 pages per minute (ppm) is considered good for most home printers. For office printers, a print speed of 20 ppm is typically adequate. However, if you frequently print large documents or photos, you may want a printer with a higher print speed.
A printer`s printing speed is simple: it`s how quickly it can produce properly printed pages, whether they`re black-only documents, color documents, or photos.
Drum printers: A drum printer is a large, cylindrical drum that has raised characters on its surface in strips. Drum printer speeds are between 300 and 2000 lines per minute. Chain printers: A chain printer uses a print chain, wrapped around two pulleys.
Help maximize your uptime with print speeds up to 21/20 ppm (letter/A4).
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Which NIC and NIC F/W download and where find it OKI C511dn
ANSWER : Sorry, the right address: https://mega.nz/#F!oEkA3JKZ!YiWuhQTBl5ym-ilNRPYTaw
Firmware(EEPROM) Oki C9650n.
ANSWER : Try the stuff I’ve find searching my OKI C511dn net card (still searching)
image drum message
ANSWER : You don’t have to replace it until it wears enough to affect the print quality. You’ll get spots or stripes. Here you go on a free reset. If you read the thread, someone says the procedure also works on your model. http://www.fixyourownprinter.com/posts/33634
oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?
Where can i get base firmware for my Oki MC362?
ANSWER : Jopa, I’ve been fighting with an OKI c511dn for days (and nights) and all I’ve got is that; try it if you dare… 😉
Oki C5800 Lost Network settings/menu
ANSWER : Did this ever work for you?
Help the cover on the back of my printer is lost and my printer keeps on shooting out paper from the back end with no writing on it?
ANSWER : There are no parts available, therefore no solution to your problem.
ANSWER : This forum thread covers the reset procedure