Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Turn off the printer and remove the toner cartridge. Look inside the printer in the area below where the cartridge goes. The toner sensor is on the right-hand side.
Image by Brusspup. Press the tiny reset button located beside the chip and hold for 10 seconds. Depending on the brand and model of the cartridge, you may not need to hold the button for 10 seconds, but it won`t harm the cartridge so do it anyway just to be safe.
Verify the toner cartridge is installed correctly.

If you install a new toner cartridge but the “Toner Low”, “Replace Toner” or “Toner Ended” error indication remains, the toner cartridge may not be installed correctly. Reinstall the toner cartridge, referring to the instructions on how to replace the toner cartridge.

Inspect the inside of the printer for the connection point. With a lint-free/dry cloth lightly wipe the contacts on both cartridges and printer to remove any dirt, or residue being careful not to cause any damage. Replace the cartridges in the printer. Power the printer back on.
A resetter is a small plastic tool that physically connects with the printer cartridge chip and tells the chip to reset its memory.
Locate the waste toner container sensor near the bottom of the Waste Toner Container. Clean the transparent plastic square. Clean the black sensors inside the printer, where the waste toner container sensor is located during normal operation. Power on the printer without the Waste Toner Container installed.
1. Open the front cover and keep it open. 2. Press the “Return ” and “Cancel ” buttons at the same time, hold for 1 to 2 second, after releasing 2 buttons, press the “Return” button again at once.
If your new compatible toner cartridge came without a chip, you will have to re-use the chip from the original HP toner that came with your printer in order to use the compatible toner. The cartridge will work fine EXCEPT the printer will not read the toner levels.
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
Inspect the inside of the printer for the connection point. With a lint-free/dry cloth lightly wipe the contacts on both cartridges and printer to remove any dirt, or residue being careful not to cause any damage. Replace the cartridges in the printer. Power the printer back on.
Locate the waste toner container sensor near the bottom of the Waste Toner Container. Clean the transparent plastic square. Clean the black sensors inside the printer, where the waste toner container sensor is located during normal operation. Power on the printer without the Waste Toner Container installed.
Open the Canon IJ Printer Assistant Tool. Make sure that the printer is on, and click Remaining Ink Notification Settings. Select the ink color and click Reset to reset the remaining ink level counter. When you reset the remaining ink level count, you must refill the ink tank to the upper limit line.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ┬┐isn’t it?

Read Full Q/A … :
Unknown Printer

reset toners and image drum life
ANSWER : They both have chips that need to be replaced. There are videos on YouTube that show how to refill the toners and how to replace the chips.

Read Full Q/A … :
Unknown Printer

RESET OKIDATA TONER DRUM
ANSWER : Hi guys

Read Full Q/A … :
Unknown Printer

RESET OKIDATA TONER DRUM
ANSWER : HI there, oki image drums contain a fuse. You can reset them if they are working/printing ok by replacing the fuse. Hope this helps. The fuse is located inside the unit so is a bit fiddly.

Read Full Q/A … :
Unknown Printer

Samsung ML-1610 toner low warning need reset help!
ANSWER : in my printer shows the online error problem

Read Full Q/A … :
Unknown Printer

ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.

Read Full Q/A … :
Unknown Printer

Drum reset
ANSWER : This forum thread covers the reset procedure

Read Full Q/A … :
Unknown Printer

Resetting of chip for hp toner Q6000A
ANSWER : HP Color Laser Jet 1600 – Thanks for all the above information. Even though the 1600 is a different printer, I followed the above: “…go to “System Configuration”; then to “Print Quality”; I then get a choice of “Replace Supplies” and then “Overide Out”…” Selecting “Overide Out” got my 1600 back to printing, although I did have do perform the steps TWICE before it seemed to take affect. Not sure what was going on, but I’m happy that people put the information out there for the rest of us to have.

Read Full Q/A … :
Unknown Printer