How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Check that the same IP address is set for the machine and the machine`s port setting on the computer. Check that the IP address is not duplicated by another device. Check that the correct IP address, subnet mask, and gateway address are set. If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.
Turn the printer on while holding down the FORM FEED button. This test prints the character set in a rolling pattern using the default type style. Press the SELECT button or turn off the printer to stop the test. Oki Data has taken care to insure that the information is complete, accurate and up-to-date.
To do this: 1 Press and release SEL (1) to take the printer off-line. The SEL light goes out. 2 Press and hold SHIFT (2), then press the RESET/CHARACTER PITCH key.
Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.
Select Control Panel. Select Devices and Printers. Right click on the printer and select Printer Properties. Click Print a Test Page.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
Reset the transfer belt unit counter: a. Press ON LINE, then press and hold MENU 1/Menu 2 until COLOR REG. ADJUST appears on the display.
- Start the Status Monitor for the printer.
- Click on Printer Setup tab – Printer Menu button – Maintenance 1 tab.
- Click the [Reset] button next to Drum Counter, then click on the [OK] button to reset the drum counter.
4 juin 2023
How do I restore printer settings to default?
- Press the. button a few times to display [MAINTENANCE MENU].
- Press the “OK” button.
- Confirm that [MENU RESET/EXECUTE] is displayed. If other than [MENU RESET/EXECUTE] is displayed, press the or. button a few times to display [MENU RESET/EXECUTE].
- Press the “OK” button.
14 déc. 2022
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Paper won't advance on Okidata 320 Turbo
ANSWER : Check the top and rear paper sensors to make sure they are not obstructed, stuck, or bad.
Firmware(EEPROM) Oki C9650n.
ANSWER : Try the stuff I’ve find searching my OKI C511dn net card (still searching)
Weird Problem: Epson R2400 Printer won't power on
ANSWER : I just had exactly the same thing happen. The printer is usually on, but now is off and will not power on. Anybody know what is going on? Is there a fuse blown? Where would that fuse be?
Oki C5300 problem : network menu disappeared.
ANSWER : You need MuWin and your NIC firmware to upload to the host, but both things are keep under cover by OKI… Find attached old (and probably useless for you) files; check and say.. (https://mega.nz/#F!oEkA3JKZ)By the way, you should specify what firmware do you need ¿isn’t it? I don’t know yet what firmware uses my c511dn nor what NIC host it mounts… :~(
Which NIC and NIC F/W download and where find it OKI C511dn
ANSWER : Sorry, the right address: https://mega.nz/#F!oEkA3JKZ!YiWuhQTBl5ym-ilNRPYTaw
problem in driver
ANSWER : we offer Assignment Help Australia for you do not waste more time to searching others just click us.
Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.
problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.