HP CopyJet Color

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check for issues with the ink cartridges

Very low ink levels, using non-HP cartridges, and rough handling can cause print quality issues. Replace any non-HP or refilled cartridges with genuine HP cartridges. HP supplies are available from the HP Store and local retailers.

Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors.
A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.
Why does my HP printer keep saying cartridge problem? Please check and wipe the cartridge contacts. The common cause of the cartridge problem message is the gold contacts found on an electronic chip on the body of the HP cartridge being cloaked with dirt or ink or even because of physical damage.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
The first step in printer calibration is to calibrate your monitor. Then, make sure you use the correct printer driver for your printer. Within the printer driver are controls for fine-tuning the overall appearance of color from your printer. Depending on your needs, this may be sufficient to get the color you want.
Most commonly “Cartridge Problem” means that your HP printer simply cannot recognise the colour or black ink cartridges. Thankfully however this error message can usually be cleared with some basic troubleshooting.
Clean the Cartridge Contacts: one of the most common reasons you might get a cartridge problem error when your cartridges are new and full is the contacts on the cartridge might be dirty or otherwise obscured from making good contact with the electronics in the printer head carriage.
Streaks, smears and stripes on your printout are all signs of a bad cartridge, as is a lack of a particular color or a color appearing very faint. Sometimes the printer refuses to print if a cartridge is faulty.
Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
RGB colors that are output as CMYK colors are pulled to the nearest CMYK equivalent which is always darker. The reason why the printer output doesn`t match the screen is because light can`t be printed.
Why is your printer printing pink? Your printer may be printing pink as the other ink cartridges have run out. Common printer-to-page technology processes colour in four parts; cyan, magenta, yellow and black (CMYK), or toner. The ink cartridges in your inkjet or colour laser printer are split up into four colours.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

hp officejet pro 1150c
ANSWER : great

Read Full Q/A … :

HP CopyJet Color

I just bought an officejet 3830 2 weeks ago. Now it won't print at all! Says inkjet jam. It's not! I've done all the fixes as per hp's website now what?
ANSWER : Take it back and exchange it under warranty.

Read Full Q/A … :

HP CopyJet Color

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :

HP CopyJet Color

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :

HP CopyJet Color

HP Officejet Pro L7680-problems w/black print head
ANSWER : VLCM Print tech supporters are very helpful to support printing related issues. They are industry certified technicians. they have 12+ years of handful experience. visit page – vlcmprint.com

Read Full Q/A … :

HP CopyJet Color

my B\Y cartridge is expired can you help me to know how to pass it ?
ANSWER : any help 🙁

Read Full Q/A … :

HP CopyJet Color

HP Color Laserjet 500 series M551n Error 98.00.0C
ANSWER : I just ran into one of these on a 4 year old m551. Failed to complete startup at the end of disk check. Followed the above link for troubleshooting.

Read Full Q/A … :

HP CopyJet Color

Error message reads remove and check right cartridge
ANSWER : You can try cleaning the contacts on the back of the cartridge and the ones that they contact in the printer. Other than that, you have to replace the cartridge. I once had one that did the same thing. I swapped the cartridge with another printer of the same model and both printers worked fine. I swapped them back and the original printer got the same error. The other printer had no problem with either cartridge. I swapped them back and left them that way.

Read Full Q/A … :

HP CopyJet Color