Canon Color Bubblejet (BJC) i860

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the nozzle check pattern shows adequate ink, but the printer doesn`t print color, clean the printhead. After that, print a nozzle check pattern. After performing printhead cleaning, perform a printhead deep cleaning. If still, the problem persists, switch off your printer and do the deep cleaning after a day.
This cartridge is compatible with several popular Canon printers, including BJC-8200, i900D, i9100, i950 Series, i960 Series, i9900, PIXMA iP6000D, PIXMA iP8500, S800, S820, S820D, S830D, S900, and S9000.
Ink flush consumes a lot of ink, and the consumed ink is discharged to the maintenance cartridge. If the free space is low, replace it with a new maintenance cartridge. If the available capacity of the maintenance cartridge is low, a message is displayed and ink flush cannot be performed.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
The Canon CLI-8BK Black Ink Cartridge is designed for use with the Canon iP4200, iP5200, iP6600D & MP500, MP800 Printers. Now you can print affordable digital photos that look and feel like color lab prints using this Quick-Dry, ultra-fine ink.
In short, no! Printers need specific cartridges to work, which is why we have clear listings across the website for what ink works in any printer. You cannot just use any model/brand cartridge in a printer, even if they look the same.
Canon ink cartridges work in sets of both pigment and dye-based inks, which is why most Canon printers take two black cartridges. For example the Canon PGI-450XL high yield black ink cartridge is pigment-based, while the Canon CLI-451XL high yield black ink cartridge is dye-based.
Ink flush consumes a great amount of ink. Frequent ink flush can rapidly consume ink, so perform ink flush only when necessary. Performing ink flush when the remaining ink level is not enough may damage the printer.
Printing with an empty cartridge will soon cause printhead nozzles to overheat and fry remaining ink solid.” So, if you must continue to print, use the “Printing Preferences” dialog, on the “PAGE SETUP” tab, with the “PRINT OPTIONS…”, “Print With:” option: “All Colors (Default)”, “All except PGBK (Black)”, or “Only …
Open the Canon IJ Printer Assistant Tool. Make sure that the printer is on, and click Remaining Ink Notification Settings. Select the ink color and click Reset to reset the remaining ink level counter. When you reset the remaining ink level count, you must refill the ink tank to the upper limit line.
Click the start menu and search for `Devices and Printers`. Select devices and printers in the search bar. This will allow you to see the printers connected to the computer. Click the printer you want to check, and you`ll see the ink levels at the bottom of the devices and printers section.
If your machine`s cyan, magenta, or yellow toners run out, you can choose Mono in the printer driver to allow you to keep printing.
A: The yellow toner or white powder functions as a coating designed to lubricate the internal components of the toner cartridge upon start up.
Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors.
When designing for a printed format, the best color profile to use is CMYK, which uses the base colors of Cyan, Magenta, Yellow, and Key (or Black). These colors are usually expressed as percentages of each base color, for example a deep plum color would be expressed like this: C=74 M=89 Y=27 K=13.
Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors.
Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

HP LaserJet 500 Color MFP M575 Scanner Calibration
ANSWER : 0512 is service code for m575

HP 4700 Color alignment
ANSWER : Thanks much, this method worked for me.

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Reset HP Color Laserjet 4700 transfer kit
ANSWER : How about the situation when resistor does not reset the transfer belt count and even new transfer belt out of the box is not doing it. Do you have any idea how to solve this problem? I did reset transfer belts and fusing units on several HL 4700 printers with no problem but also I came across few which were not possible to reset even with oryginal parts.

color is not printing true
ANSWER : I changed all toners and drum and it is still doing it.

HP Color Laserjet 500 series M551n Error 98.00.0C
ANSWER : I just ran into one of these on a 4 year old m551. Failed to complete startup at the end of disk check. Followed the above link for troubleshooting.